These Rubber Band Saw Tires Installation Process:Please Make sure to unplug your band saw whilst changing any parts or servicing it.Rubber band saw tires don't require adhesive, but they do need to be stretched on.Remove the old tires, and clean the machine of any dirt, debris, or adhesive.The smaller tires can be fitted by stretching them on by hand. If you can't get the tires on by hand stretching them, clamp the tires to the wheel. Work the tire around the wheel in both directions and add clamps as you go. A dowel rod or smooth tool can be used to pry the tire on.Once the tire is securely on the wheel, the stretch will need to be smoothed out. With a dowel between the tire and the wheel, roll it around the entire wheel.Our Bandsaw Rubber Tires compatible with the following machines:For Dewalt DW328 Type 3 / Type 4, DW328K Type 2 / Type 3 / Type 4, DW329 Type 2, DWM120 Type 1 / Type 2, DWM120K Type 1 / Type 2, 725 Type 1 / Type 2 / Type 3, 726 Type 1 / Type 2 / Type 3, 736 Type 1, 7724 Type 1 / Type 2 / Type 3, 9725 Type 1 / Type 2 / Type 3, D28770 Type 1, D28770K Type 1, DCS374B Type 1, DCS374P2 Type 1, 3128-BDK Type 2, 3128K Type 2, 3129 Type 2, 3129K Type 2, J-724 Type 1 / Type 2 / Type 3, PC7723 T.For Porter Cable 725, 726, 736, 7723, 7724 and 9725.For Milwaukee 6225, 6226, 6230, 6230N, 6232-6, 6232-6N, 6236, 6236N, 6238N, 6238, DW328, DW328K, DW329, DW329K and D28770 type 1.For Others Fits Saws that use 44-7/8 in Blades