Gain and Direction Adjustment: There are three knobs used to adjust the basic gain of the gyro for aileron, elevator and rudder separately, clockwise to increase, anti-clockwise to decrease.The basic gain will be 0% if the knob is in the neutral position and will be higher if the rotation angle is getting bigger.
Anti-sideslip Function For Nose Wheel: Separate auxiliary channel output is added to control front gear steering servo, which is remarkably helpful for take-off, landing and taxiing straight.
Three Flight Modes: Lock Mode, Balance Mode and Gyro Off Mode
Calibration Function: This is designed for airplane level calibration. Mount the gyro in place and put the airplane on a flat surface. Power on the airplane and wait for its self-check. Press the button and hold for 3 seconds, then release the button --- the control surfaces will oscillate upward and downward for a few times, which means the calibration is completed. Level calibration will affect if the airplane level attitude is correct or not in the Balance Mode.
Original DJI Mavic 2 Pro/Zoom shell Cover Mavic 2 Body Shell Upper Cover,Assembly Repair Parts for DJI Mavic 2 Pro/Zoom,Genuine Spare Replacement (Upper Shell)
KWD 18.500
MightySkins Compatible with DJI Mini 2 Portable Drone - Bright Smoke | Protective, Durable, and Unique Vinyl Decal wrap Cover | Easy to Apply, Remove, and Change Styles | Made in The USA
KWD 14
Front Left Motor Arm Compatible with DJI Mavic Mini 2 Spare Parts Drone Arm
KWD 17.500
iFlight 4pcs XING 2205 2300KV 4-6S FPV Motors 12x12mm Mount Hole for Protek35 Cinewhoop Quadcopter Motor for FPV Drone Part
KWD 32.500
