Product Description:
The 35mm rail rack is a product designed to be installed on top of a 19 inch standard telecommunications cabinet. It is suitable for installing all Din rail products on the rail rack.
Standard rail installation equipment such as industrial grade transceivers, industrial grade switches, air switches, industrial power adapters, and various instruments can be well installed on this rail rack. The Din rail rail machine can effectively solve the installation problem of Din rail products in the cabinet.

Product features:
DIN-Rail racks can be installed in standard 19 inch cabinets.
The depth of the product can be adjusted, with a total of 8 depths to choose.
Includes a standard 35MM guide rail.
Simple and secure design, easy installation.
Maximum load-bearing capacity of 9kg.
Depth adjustment range: 48-174mm (8 depths in total)
Use 2mm thick anodized aluminum alloy material for fastening and durability.

Product installation:
1. Measure the depth of the guide rail installation equipment and select the appropriate hole position to assemble the guide rail frame according to the depth table. If there are multiple devices, the one with the highest depth shall prevail. For example, if the depth of your device is 95mm, you should choose the hole position 4 or the hole position after 4.
2. Use M4 screws to fix the side panel of the rack to the horizontal panel of the rack. Once the hole positions are determined, you only need to tighten the four screws with a Phillips screwdriver to complete the assembly. Pay attention to the direction of the horizontal and side panels during assembly.
After the assembly of the rail rack is completed, use the included M6 cabinet screws to install it into the 19 inch cabinet, and then hang the rail equipment as needed.