Related Items

---

• CGA580 High-Pressure Nipples for Compressed Inert Gas to Male NPT 1/4" MNPT, CGA 580 Cylinder Adapter Made of stainless steel 304 (CGA580, SS316L, Length=88.5mm 1pc) KWD 12
• Conical Reducer with ISO-KF Flange KF16 KF25 KF40 KF50 (KF40 to KF25) KWD 10
• bmotiontech 1.5" OD PVC hose adapter to ISO-KF KF40 NW40 flange for DIY PVC vacuum bellow KWD 10
• bmotiontech superior Grade NW16 KF16 Tee 3-Ways Vacuum Adapter, All Ends with KF-16 Flange, Made of Stainless Steel 304, Finely Polished (2Pcs - KF16 equal TEE) KWD 23.500
• bmotiontech over pressure relief valve keeps vacuum chamber below excessive positive pressure < 1.5psig, improved version, One-piece valve body, minimized potential leak (KF25 flange) KWD 21.500
• bmotiontech KF40 flange to Male NPT/MNPT Fitting (ISO-KF KF40 QF40 NW40) (1/2" 0.5 inch MNPT to KF40, Pack of 1 pc) KWD 9.500
• Equal Tee block SS304 with 3 Female NPT FNPT 1/4" 0.25" connections threaded holes, stainless steel 304 forged pipe fittings,1/4" x 1/4" x 1/4" FNPT (2pcs) KWD 11.500
• bmotiontech KF40 NW40 Standard Stainless Steel Corrugated Bellow Hose Set, vacuum bellow hose with 2X Al clamp / 2X SS Centering Ring / 2X FKM O-Ring (1800mm / ~6ft KF40, thick wall bellow) KWD 18
• B & K 101-008NL 2" Check Valve KWD 8.500
• SV98-T39S 12V Solenoid Valves Replacement for Hydraforce Forklift 12DR 1505 Replacement for Caterpillar CAT Excavator CT60 CT8 Replacement for JCB TG300 3CX 217 Replaces SV3-D2-D12 580037013 KWD 21.500
• bmotiontech designed Version A ISO-KF KF25 NW25 Flange Vent Valve, air admittance valve, up to air valve for vacuum chamber (KF25 vent valve) KWD 11
• bmotiontech ISO-K 63 flange (clamp type) to NW25 KF25 flange reducer converter adapter (ISO-K 63 to KF25 reducer) KWD 18.500
• Oetiker 16300023 Stainless Steel 304 Adjustable Hose Clamp, One Ear, Clamp ID Range 28.6 mm (Closed) - 35.0 mm (Open) (Pack of 5) KWD 4
• bmotiontech 1-inch Baseplate Feedthrough bulkhead to KF25 flange, this adapter fits 1" Internal diameter vacuum chamber opening or hole KWD 26
• 2" inches MNPT x KF50 Flange Vacuum fittings adapter, Made of SS304, Male NPT KWD 18.500
• uxcell Brass Pipe Fitting Reducer Adapter 1/4" BSPP Male x 1/8" BSPP Female for Water Oil Air Pressure Gauge Engine Temp Sensor, Pack of 2 KWD 3.500
• bmotiontech Manual Right Angle Valve, Bellow Seal Valve, with ISO-KF KF25 Flange + 2 Sets Aluminum Wing nut Clamps + Centering Rings + FKM O-Rings (KF25 90°Angle Valve) KWD 40.500
• ISO-KF NW16 KF16 Flange Ball Valve, Shut Off Valve, Isolation Valve, Good for Vacuum foreline Setup (KF16 Flange) KWD 22
• Air Hose Inline Manifold, 1/4" Block Splitter, 2 Way 5 Port Pneumatic Air Compressor, Manifold Fitting, Air Distribution Block for Compressor KWD 2.500
• Ball Valve Dual-direction Water Valve DN15 1/2-Inch BSP Male and Female Thread Brass Pipe Valve with Lever Handle KWD 5
• Brass Thread Adapter BSPT-NPT (1/2" BSPT Male X 1/2" NPT Female-2 Pack) KWD 3.500
• bmoitontech ISO-KF KF16 NW16 Flange to 3/4" OD PVC Hose Adapter for DIY PVC Vacuum Bellow Hose, hose clamp included (Pack of 2) KWD 13.500
• 3/4 inches OD Barbed Hose Fitting to KF25 NW25 Flange Hose Barb Adapter (Pack of 1pcs, 3/4" or 20mm) KWD 5.500
• bmotiontech Manual Right Angle Valve, Bellow Seal Valve, with ISO-KF KF40 Flange + 2 Sets Aluminum Wing nut Clamps + Centering Rings + FKM O-Rings (KF40 90°Angle Valve) KWD 57.500
• ISO63 ISO-K 63 equal elbow clamp type flange KWD 39.500
• Garden Hose Quick Connect,Standard Connection Garden 4/6 Points -Multi-Thread Sink Faucet Adapter,Water Valve Joint Internal Thread Connection,For Any 4/6 Garden Hose, Sprinkler,Spray Nozzle KWD 3.500
• -21% Watts 959040 Aqualock (P-450) CTS Globe Valve, 3/8" KWD 5.500 KWD 7
• 1/4" 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve 12V DC KWD 5
• John Guest Acetal Copolymer Tube Fitting, Three Way Divider, 1/2" Inlet x 3/8" Outlet Tube OD (Pack of 10) KWD 30.500
• CGA350 High-Pressure Nipples for Compressed Inert Gas to Male NPT 1/4" MNPT, CGA 350 Cylinder Adapter Made of stainless steel 304 (CGA350, SS304, Length=80mm 1pc) KWD 12
• 1 inches OD Barbed Hose Fitting to KF25 NW25 Flange Hose Barb Adapter (Pack of 2pcs, 1 inches ot 25mm) KWD 9.500