Search

DIGITEN G3/4" Water Flow Hall Sensor Switch Flow Meter Flowmeter Counter 1-60L/min with 1.2m Wire

KWD 6

Brand
DIGITEN
Category
Sensors
Weight
101 g
1 +

Special Features

  • The Water Flow Sensor is light, nimble outline, small size and easy to install. The bearings used in the rotating part.
  • There is an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.
  • Working voltage range: DC 3-24 V
  • Output Waveform: Square Wave,output pulse signal.
  • Waterproof, heat resistance, pressure resistance, cold resistance.

Description

Spcification
External Thread Diameter: G3/4" (BSP)
Frequency: F=5.5 * Q (L / Min)
Error: ±2%
Working Voltage Range: DC 3-24 V
Maximum Current: 15 mA(DC 5V)
Load Capacity: ≤10 mA(DC 5V)
Flow Range: 1-60L/min
Operating Temp: ≤80℃
Operating Humidity: 35%~90%RH
Allow Compression: Water pressure 1.75 Mpa below
Insulation Resistance: >100M OHM
Storage Temperature: -25℃~+80℃
Storage Humidity: 25%~95%RH
Output Waveform: Square Wave,output pulse singal
Cable Length:120cm

Note
1. The Water Flow Sensor is light, nimble outline, small size and easy to install. The bearings used in the rotating part.
2. There is an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.
3. Three wire connection: Red for positive, black for negative, yellow for pulse signal.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}