SELF-LOCKING PRESSURE REGULATOR DESIGN:This is an Air Pressure Regulator Valve with self-locking pressure regulator design, which features easy operation and easy adjustment. There are only three steps to set the pressure: first lift the regulator to unlock it, then rotate it to adjust the pressure, and finally lock it.
PERFORMANCE PARAMETERS:The regulator valve has a working pressure of -100 to -1.3 Kpa. It has a pressure resistance of up to 100 kPa and an inlet air consumption of less than 0.6 L/min (ANR). In addition, the accuracy of the handwheel resolution is less than 0.13kPa. These high-performance parameter settings ensure the product's adjustment accuracy and stability in use.
RC 1/8 INCH INTERFACE THREAD: the pressure gauge parameter range is - 100kPa to 0kPa. the interface thread specification of the pressure gauge is Rc 1/8-inch, which provides users with clear and accurate pressure feedback information.
DIAL DESIGN: With the clear dial design, you can easily monitor and adjust the pressure, more accurate and convenient to use. Accurate and convenient! It is not only suitable for fixed position device adjustment, but also very suitable for scenarios where you need to carry and move the device.
APPLICATION SCENARIOS: Our air regulator can be widely used in compressed air equipment and piping, including air compressors, storage tanks, dryers, air compression piping and other scenarios. Its main function is to adjust and control the air pressure to ensure the normal operation of the equipment
3Pcs Brass Flare Tube Fitting, Half-Union Fitting, 3/8 inches Flare x 1/8 NPT Male Pipe ( NPT Thread Diameter:0.44 inches )
KWD 4
ISPINNER 25pcs 304 Stainless Steel 8.8-10.5mm Single Ear Stepless Hose Clamps
KWD 3.500
DERNORD Sanitary Adjustable Pressure Vacuum Relief Valve Safety Valve SS304 1.5" Tri-Clamp
KWD 34
Normally Closed Electric Water Shut off Valve, Brass Electric Solenoid Magnetic Valve, Water Inlet Flow Switch Valve for Water Control, 0.02mpa~0.8mpa, 3/4 Inch DC 12V
KWD 8
