Qty: 1. Maintains water pressure between 10-20 psi (15 psi nominal), which is great for drip tape, soaker hose systems, and any application where low pressure is desirable. It may also be used with drip systems.
Low flow rate to save water. Approximately 2.3 GPM (gallons per minute) at 10 psi and 7.0 GPM at free flow. Maximum Inlet Pressure: 125 psi. May be left under constant pressure. Note: As with most drip system pressure regulators, the outlet pressure might slowly build up above 20 psi if the outlet is completely shut.
Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). Connects to a standard hose bib or garden hose in USA and Canada.
It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25% lead. Note: Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time.
Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight.
-11%
QWORK Self-Tapping Saddle Valve, Pack of 2, Copper Needle Valve with 1/4" Compression Outlet, Fit 3/8" to 1-1/4" OD Tube
KWD 4
Kerick Valve MA3P2 PVC Mini Float Valve, Tank Mount, Adjustable Arm, 1.5 gpm at 60 psi, 3/8" NPT Male
KWD 6.500
QWORK Cam and Groove Fitting, 2" Buttress x 2" Male Adapter, 1 Piece
KWD 3
Lead-Free Forged Brass Air Compressor In-Line Ball Shut Off Valve, Quarter Turn, 1/4" Male NPT (MNPT) X 1/4" Female NPT (FNPT) Qty: 2
KWD 5.500
