Related Items

---

• CGA580 High-Pressure Nipples for Compressed Inert Gas to Male NPT 1/4" MNPT, CGA 580 Cylinder Adapter Made of stainless steel 304 (CGA580, SS316L, Length=88.5mm 1pc) KWD 12
• -17% uxcell Compression Tube Fitting, 1/4 NPT Male x Ф1/8" Tube OD with Double Ferrules KWD 2.500 KWD 3
• Conical Reducer with ISO-KF Flange KF16 KF25 KF40 KF50 (KF40 to KF25) KWD 10
• bmotiontech 1.5" OD PVC hose adapter to ISO-KF KF40 NW40 flange for DIY PVC vacuum bellow KWD 10
• bmotiontech superior Grade NW16 KF16 Tee 3-Ways Vacuum Adapter, All Ends with KF-16 Flange, Made of Stainless Steel 304, Finely Polished (2Pcs - KF16 equal TEE) KWD 23.500
• bmotiontech over pressure relief valve keeps vacuum chamber below excessive positive pressure < 1.5psig, improved version, One-piece valve body, minimized potential leak (KF25 flange) KWD 21.500
• bmotiontech KF40 flange to Male NPT/MNPT Fitting (ISO-KF KF40 QF40 NW40) (1/2" 0.5 inch MNPT to KF40, Pack of 1 pc) KWD 9.500
• Equal Tee block SS304 with 3 Female NPT FNPT 1/4" 0.25" connections threaded holes, stainless steel 304 forged pipe fittings,1/4" x 1/4" x 1/4" FNPT (2pcs) KWD 11.500
• Brass Hose Barb Fitting Union/Splicer/Mender/Joiner Assortment Kits, 3/16" 1/4" 5/16" 3/8" 1/8" 5/8" 3/4" Barbed x Barbed (10 PCS (3/16"X3/16")) KWD 4.500
• bmotiontech KF40 NW40 Standard Stainless Steel Corrugated Bellow Hose Set, vacuum bellow hose with 2X Al clamp / 2X SS Centering Ring / 2X FKM O-Ring (1800mm / ~6ft KF40, thick wall bellow) KWD 18
• bmotiontech designed Version A ISO-KF KF25 NW25 Flange Vent Valve, air admittance valve, up to air valve for vacuum chamber (KF25 vent valve) KWD 11
• bmotiontech PTFE 1/2" 0.5" Male NPT to KF25 adapter fittings adapter interface MNPT to KF25 NW25 KWD 8.500
• bmotiontech 1-inch Baseplate Feedthrough bulkhead to KF25 flange, this adapter fits 1" Internal diameter vacuum chamber opening or hole KWD 26
• 2" inches MNPT x KF50 Flange Vacuum fittings adapter, Made of SS304, Male NPT KWD 18.500
• bmotiontech Manual Right Angle Valve, Bellow Seal Valve, with ISO-KF KF25 Flange + 2 Sets Aluminum Wing nut Clamps + Centering Rings + FKM O-Rings (KF25 90°Angle Valve) KWD 40.500
• ISO-KF NW16 KF16 Flange Ball Valve, Shut Off Valve, Isolation Valve, Good for Vacuum foreline Setup (KF16 Flange) KWD 22
• uxcell Plastic Straight Union Push to Connect Tube Fitting 16mm OD Push Fit Lock 4pcs KWD 4.500
• Brennan Industries 1929-62-16-16 Steel SAE Port Block, O-Ring Face, Code 62, 1-5/16"-12 NPT x 7/16"-14 NPT Thread, 1" Flange KWD 13
• -13% Brennan Industries C2405-10-08 Steel Straight Adapter Flareless Bite Type Fitting, 5/8" Bite Type Tube x 1/2"-14 Female NPTF KWD 3.500 KWD 4
• bmoitontech ISO-KF KF16 NW16 Flange to 3/4" OD PVC Hose Adapter for DIY PVC Vacuum Bellow Hose, hose clamp included (Pack of 2) KWD 13.500
• 3/4 inches OD Barbed Hose Fitting to KF25 NW25 Flange Hose Barb Adapter (Pack of 1pcs, 3/4" or 20mm) KWD 5.500
• bmotiontech Manual Right Angle Valve, Bellow Seal Valve, with ISO-KF KF40 Flange + 2 Sets Aluminum Wing nut Clamps + Centering Rings + FKM O-Rings (KF40 90°Angle Valve) KWD 57.500
• tsingseen life Stainless Steel 3/8" Hose Barb, 3 Way Tee T Shape Barbed Co2 Splitter Fitting (1) KWD 4
• Upgraded 24"W x 24"H Backflow Preventer Cover Aluminum Foil (5℉) - Industrial 600D Winter Sprinkler Valve Covers for Outside, Anti-UV Winter-Freeze Water Well Pump Cover, Gray KWD 11.500
• -15% Manitowoc Ice 000015045 Service Valve Solenoid Evul3 115 Volt 3 KWD 49.500 KWD 58
• ISO63 ISO-K 63 equal elbow clamp type flange KWD 39.500
• Hydraulic Relief Valve RV10-20A-0-N-33 Compatible with HydraForce KWD 26.500
• CGA350 High-Pressure Nipples for Compressed Inert Gas to Male NPT 1/4" MNPT, CGA 350 Cylinder Adapter Made of stainless steel 304 (CGA350, SS304, Length=80mm 1pc) KWD 12
• 32823 PEX Tee, 1/2" x 1/2" x 3/4", 0.75" ID, Crimp, Plastic (Pack of 5) KWD 8
• 1 inches OD Barbed Hose Fitting to KF25 NW25 Flange Hose Barb Adapter (Pack of 2pcs, 1 inches ot 25mm) KWD 9.500
• 702-21-57400 702-21-57500 702-21-55901 Main pump Solenoid Valve for KOMATSU PC200-7 PC220-7 PC200-8 Excavator KWD 24.500