Product Description
This current detection sensor mainly detects and prevents equipment from overcurrent by setting the overcurrent point, so as not to cause equipment damage.

Specification:
Type: Current Detection Sensor
Current detection range: AC 0.3A-5A
Operating voltage: DC 5V / 12V / 24V(optional)
Working current: less than 10mA
Relay load: AC 250V 10A Max , DC 30V 10A Max.
The overcurrent signal setting is adjustable and the resolution is set to 0.3A.
Induction sensitivity: Potentiometer is adjustable.
Operating frequency range: 20Hz-400Hz
Output mode: switch signal output
Maximum detection wire diameter: 5.2mm
Mounting hole: hole diameter is 3mm, hole pitch is 52.5mm
Operating environment: -40℃ - 85℃
Board size: Approx.38 * 44mm / 1.5 * 1.7in

Board Description:
VCC: Operating voltage positive;
GND :Operating voltage negative;
NO: Normally open, the relay pulls before the NO and COM disconnect, short-circuit after the suction;
COM: common, relay common interface;
NC: Normally closed, the relay before the NC and COM short-circuit, after pull off;

Package includes:
2 x Current Detection Sensor(12)
1 x Screwdriver