Search

42V Electric Scooter Charger 4 Prong for Voyager 36V Batteries, 42V 2A 4-Pin Connector Battery Charger Replacement

KWD 11.500

Brand
Suptopone
Weight
202 g
1 +

Special Features

  • 1.Output: 42V 2A. Input : AC 100-240V 50-60HZ. Charging Plug Type: 4 prong 0.35 inches female head.
  • 2.4 Prong Notched Connector(0.35inch) :Compatible with voyager
  • 3.Indicator: Red light means Charging. Light turns green from Red means battery full charged.
  • 4.Safe and Smart: Multiple protections to save your battery. Sepcial designs to extend the cycle life of your. Easy to use with a LED indicator.
  • 5.One Year Guarnteed: If you are not satisfied with Our Charger, You will be refunded or replaced with a new One.

Description

This charger is Specially designed for voyager✔ Li-ion battery.
It is optimized to improve the cycle life of your battery according to the chemistry of the battery.
Save your time by fast charge with high current.
6 protections to ensure the safety.
High reliability, long life span, High efficiency, light weight.
Before ordering, please make sure that the connector of the old charger is the same as ours.

Don't use. for batteries with safety problems.
Don't use. if your battery connector or polarity don't fit.
Don't use. when the environment is wet.
Isn't E-mobility device accessory. Don't use. as E-mobility charger.
Cut-off the AC when the battery is full charged.
Don't charge when the battery is broken.
12 months warranty . Feel free to let us know if you have any problem.

There may be the following reasons for the charger not working after connecting to the power supply:
1. The voltage and current of the charger do not match your battery. You have purchased a charger with wrong parameters. Please tell us the brand and model of your electric bike or the parameters and plug of the original charger.
2. Due to the limited life of the lithium battery, the charger will not work if the battery is damaged. Your battery may be damaged if it is not used for more than 12 months or 2-3 months.
3. If the green light comes on when the power is turned on, but the LED light does not turn red after the battery is connected, the connector should be loose and in poor contact, and the plug can be re inserted to maintain good contact
4. If there is a green light when plugged into the power supply, and the light goes out after connecting the electric bicycle, it is because of the internal short circuit of the electric bicycle, which causes the charger to have a self-protection function. You'd better check your e-bike battery and replace it

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}