【Bicycle Tube Size】32mm Schrader value 29 inch bicycle tube.Fits most road and mountain bikes. tire width 2.125" to 2.40",2 pack include.
【Quality Tube】Made from High-quality butyl rubber compound,And it hava Better air tightness,heat resistance,and durable.Each product is strictly screened before being delivered to you.
【Pro Tool Kit】Came with 2PCS tire levers, this tire Lever help to repair a flat bicycle tire, tools are overall sleek, which will not hurt your rims pry, and durable for long time use, not rust and easily hook the spokes.
【Easy To Install】We provide two stainlee steel tire levers and detailed installation steps,you can easily get your tube out from the tire and Install a new inner tube in minutes.
【Good Service】Excellent service always been our motto,Variety of bicycle tubes are available,Please confirm the size of your bike tire before you buy And if you are not satisfied with our products,you can contact us by email or return the products for a full refund.
Description
29 Inch Bike Tube Schrader Value
Package Included:
2 bike tubes(29")
2 x tire lever
Valve Type: Schrader Valve
Valve Length: 32mm
Tube Material: Butyl
MORE DURABLE: High-quality butyl rubber compound, Better air tightness and a longer lasting tube.
Note:
1. Before installing an inner tube into a tire, please check if there is any sand grain inside the tire or if there is any cracks or other adverse factors in the tire.
2. Before installing an inner tube, please check carefully whether there is any deformation or bend in the steel rim. During the installation, do not clamp the inner tube between the tire and the rim to prevent any clamping of the tube.
3. When removing or installing an inner tube, do not use any sharp installation tool to prevent the inner tube from being pierced.
4. When putting the inner tube into the tire, the valve should extend from the rim properly so that the inner tube can be placed inside the tire more naturally and used for a longer time.
5. When both the inner tube and the tire have been installed in the rim, inflate the inner tube with 10PSI air and then check whether the inner tube has been locked in the rim properly and, if so, continue to inflate the inner tube to the standard pressure.