Professional quality recording for DSLR or camcorder

Matched pair of condenser capsules in XY stereo configuration

Compact, lightweight design

Switchable 80Hz high-pass filter

Three-level gain switch (-10 dB, 0 dB, +10 dB)

Integrated shock mount and shoe mount with ¼"-20 threaded socket for use with boom pole

7" coiled output cable with 3.5mm stereo output connector

On/off switch with power LED

Runs on a single AAA battery (not included)

Approximately 100 hours of operation time.

Foam windscreen included

Male 1/4"-20 to female 3/8" adapter included.

Transducer Type: Back electret condenser

Pattern: XY stereo cardioid

Frequency Response: 50 Hz to 18 kHz

Sensitivity: -69 dB ±3 dB (0 dB = 1 V/microbar at 1 kHz indicated by open circuit)

Gain Selection: -10, 0, +10 dB

Output Impedance: 200 Ω ±30% (at 1 kHz)

Connector: Right-angle 3.5 mm stereo male

Power Requirement: One AAA battery (not included)

Cable: Fixed, 7" (2" straight + 3" coiled + 2" straight) {17.8 cm (5.1 cm straight + 7.6 cm coiled + 5.1 cm straight)}

Dimensions: 5.0 × 1.8 × 2.8" (12.7 × 4.5 × 7.2 cm)

Weight: 5.4 oz (152 g)