Related Items

---

• CGA580 High-Pressure Nipples for Compressed Inert Gas to Male NPT 1/4" MNPT, CGA 580 Cylinder Adapter Made of stainless steel 304 (CGA580, SS316L, Length=88.5mm 1pc) KWD 12
• Whale Marine WX1503B Equal Elbow 15mm KWD 5
• Conical Reducer with ISO-KF Flange KF16 KF25 KF40 KF50 (KF40 to KF25) KWD 10
• Robert Manufacturing PF Series Bob Spherical Polypropylene Float, 1/4"-20 Female Spud, 6" Diameter, 61 oz Buoyancy KWD 5.500
• bmotiontech 1.5" OD PVC hose adapter to ISO-KF KF40 NW40 flange for DIY PVC vacuum bellow KWD 10
• bmotiontech superior Grade NW16 KF16 Tee 3-Ways Vacuum Adapter, All Ends with KF-16 Flange, Made of Stainless Steel 304, Finely Polished (2Pcs - KF16 equal TEE) KWD 23.500
• bmotiontech over pressure relief valve keeps vacuum chamber below excessive positive pressure < 1.5psig, improved version, One-piece valve body, minimized potential leak (KF25 flange) KWD 22
• bmotiontech KF40 flange to Male NPT/MNPT Fitting (ISO-KF KF40 QF40 NW40) (1/2" 0.5 inch MNPT to KF40, Pack of 1 pc) KWD 9.500
• Equal Tee block SS304 with 3 Female NPT FNPT 1/4" 0.25" connections threaded holes, stainless steel 304 forged pipe fittings,1/4" x 1/4" x 1/4" FNPT (2pcs) KWD 11.500
• -10% SEA TECH (0121325 1/2" Temperature and Pressure Relief Valve KWD 14 KWD 16
• Air Compressor Check Valve Right Brass Valve Male Threaded 90 Degree Connector for Air Pressure Tank and Compressor Piston Pump KWD 4
• bmotiontech KF40 NW40 Standard Stainless Steel Corrugated Bellow Hose Set, vacuum bellow hose with 2X Al clamp / 2X SS Centering Ring / 2X FKM O-Ring (1800mm / ~6ft KF40, thick wall bellow) KWD 18
• U.S. Solid 1/4" Brass Electric Solenoid Valve 12V DC Normally Closed VITON Air Water Oil Fuel KWD 8.500
• 4L110-06 Push-Pull Valve 5/2 Way 1/8" NPT Pneumatic Air AirTAC 2 Position 5 Way Manual Control Direct Acting Type Hand Lever 0-145 PSI KWD 12
• bmotiontech designed Version A ISO-KF KF25 NW25 Flange Vent Valve, air admittance valve, up to air valve for vacuum chamber (KF25 vent valve) KWD 11
• bmotiontech PTFE 1/2" 0.5" Male NPT to KF25 adapter fittings adapter interface MNPT to KF25 NW25 KWD 8.500
• bmotiontech ISO-K 63 flange (clamp type) to NW25 KF25 flange reducer converter adapter (ISO-K 63 to KF25 reducer) KWD 18.500
• 2" inches MNPT x KF50 Flange Vacuum fittings adapter, Made of SS304, Male NPT KWD 18.500
• bmotiontech Manual Right Angle Valve, Bellow Seal Valve, with ISO-KF KF25 Flange + 2 Sets Aluminum Wing nut Clamps + Centering Rings + FKM O-Rings (KF25 90°Angle Valve) KWD 40.500
• ISO-KF NW16 KF16 Flange Ball Valve, Shut Off Valve, Isolation Valve, Good for Vacuum foreline Setup (KF16 Flange) KWD 22
• -43% Banjo HB050-90 Polypropylene Hose Fitting, 90 Degree Elbow, 1/2" NPT Male x 1/2" Barbed KWD 2 KWD 4
• 60Pcs Straight Push Connectors Quick Release Plastic Push to Connect Fittings Kit 5/32" 1/4" 5/16" 3/8" 1/2" inch Quick Connect Air Hose Fittings KWD 6
• bmoitontech ISO-KF KF16 NW16 Flange to 3/4" OD PVC Hose Adapter for DIY PVC Vacuum Bellow Hose, hose clamp included (Pack of 2) KWD 13.500
• Plastic Hose Barb Fitting 1/2" x 1/2" Pipe Connectors Joint Splicer Mender Adapter Union for Aquarium Household Adapters Fuel Gas Liquid Air (6Pcs) KWD 3.500
• 3/4 inches OD Barbed Hose Fitting to KF25 NW25 Flange Hose Barb Adapter (Pack of 1pcs, 3/4" or 20mm) KWD 5.500
• bmotiontech Manual Right Angle Valve, Bellow Seal Valve, with ISO-KF KF40 Flange + 2 Sets Aluminum Wing nut Clamps + Centering Rings + FKM O-Rings (KF40 90°Angle Valve) KWD 57.500
• Orbit 34772 3/4" PVC-Lock x 1/2" FPT Reducing Tee KWD 2
• uxcell Reducing Pipe Fitting - Reducer Hex - 3/4 x 3/8 BSP Male Connector Zinc Finish Plating 2Pcs KWD 5.500
• ISO63 ISO-K 63 equal elbow clamp type flange KWD 39.500
• Coupling, PVC, 1-1/4 x 1 In., Slip x Slip KWD 5
• CGA350 High-Pressure Nipples for Compressed Inert Gas to Male NPT 1/4" MNPT, CGA 350 Cylinder Adapter Made of stainless steel 304 (CGA350, SS304, Length=80mm 1pc) KWD 12
• 1 inches OD Barbed Hose Fitting to KF25 NW25 Flange Hose Barb Adapter (Pack of 2pcs, 1 inches ot 25mm) KWD 9.500