FYSETC 3D Printer Accessories - 180mm X 180mm Magetic Platform Sticker - Flexible Build Plate Kit: Fit Kingrooon KP3S Printing Heated Bed Surface

It is a upgrade part to your stock bed: compare with glass bed plate or PEI , this sticker don't need glue stick or other adhesive, maintains temperature very well and adhesion is fantastic. Worked OK for Tiny things, tiny footprints. Don't try to print PETG ASA or ABS on it and it does rip up the bed,
Easy to install : came with two pieces, a magetic mat with an strong adhesive backing and a non-magetic mat. because it is polarized and only sticks in the proper orientation. After working to find the correct direction for the magetic mat, You have to join these two mats together. Adjust your z-axis, made the bed leveling again after installing, and pay attention the nozzle damage the surface.
Great bed for printing: Good adhesion, Super easy to get prints off. Compare with Textured PEI Sheet Spring Steel Build Plate, maybe this its limited for most filament, but if you often print pla, please try it: No more scraping the bed and prying. (PLA PLA+ only): Stays in place well and bends for easy removal of prints.
Reliable bed cover: spare on hand, the texture it does give if you print right on it is great. Easy to care for, just a little dish soap and water every now and again makes it like new.
Size: square 180X180mm/ 7*7 inch, can cut for other smaller size. Before ordering, please measure your real heat bed, if you can accept 5-10mm, may fit Lulbot mini,185 x 185 184x184 build plate. Our shop also has 165mm 120mm 200mm magetic plate, if needed, please enter our shop.

Hello,