Search

Search

Heat Shrink Tubing Kit - Larger Diameter - 3:1 Dual Wall Tube - Adhesive Lined - Marine Shrink Tubing - Black, Red 200 PCS

KWD 5
– 1 +

Special Features

  • [3:1 SHRINK RATIO]- Wirefy heat shrink tubing recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough.
  • [ GLUE ON THE INNER WALL ] - Dual Wall adhesive lined heat shrink tubing. When heat is applied, adhesive on the inside comes out and seals the connection, creating waterproof and long-lasting insulation. Outer wall provides abrasion resistance.
  • [ RELIABLE & PREMIUM QUALITY ] - Made of high quality polyolefin. Our Heat Sink Tubing possesses excellent flame retardant and insulation performance. 3:1 stronger retraction ratio makes it more suitable for fitting the broken wires, electrical insulation, wire connection etc.
  • [VARIETY OF SIZES] - We have included larger diameter heat shrink tubing ranging from 1/8" to 1". Shrink tubing is precut to 1.75 inches.
  • [EASY TO USE] - Simply slide the heat shrink tube over your connection point and apply heat. Professional connections made in secondS.

Description

Super Versatile Heat Shrink Tubing
Are you looking to fix a damaged wire, seal out moisture, or provide enhanced strain relief?
Dachangshund waterproof heat shrink tubing is an easy to use solution that can be used in automotive, marine, hobby RC, and home electrical wiring projects. When heat is applied, this wire shrink wrap tubing will recover to a 1/3 of its original diameter. Its high recovery ratio makes it possible to repair most damaged cable jackets without removing connectors. Therefore, 3:1 shrink ratio tubing can be used in significantly more applications compared to 2:1 shrink ratio tubing. Additionally, 3:1 marine heat-shrink tubing shrinks around wires and terminals more tightly, eliminating any air gaps.
 Heat Activated Adhesive Lining
This is a waterproof shrink tubing with the internal adhesive layer. When heat is applied, shrink tubing recovers and the internal adhesive layer melts. A small fillet of clear adhesive (about 1 mm wide) becomes visible at the end of the heated tubing. When cooled down, it forms a rigid seal. Heat activated glue strongly adheres to wires, terminals or any other surfaces. When adhesive flows, it pushes the air out and fills any gaps between the wire and the tubing, which makes the connection waterproof. For best results we recommend using a heat gun.
 3:1 Ratio Adhesive Heat Shrink Tubing Kit
- Color: Black / Red
- Quantity: 200Pcs
- Diameter: 7 Sizes
- Length: 1.75 inch
- Shrink Ratio: 3:1
- Material: Polyolefin
- Operating Temperature: -55°C to + 125°C
- Shrinkage Temp: 212℉(Fahrenheit)
- Full Shrinkage Temp: 230℉maximum
- Tensile strength: 10.4Mpa
- Dielectric strength: 15 kV / mm
- Flammability: Flame Retardant
Package Contains:
 1: φ1/8", Length: 1.75 " - 50pcs (Black-25 / Red-25)
 2: φ3/16", Length:1.75 " - 50pcs (Black-25 / Red-25)
 3: φ1/4", Length: 1.75 " - 60pcs (Black-30 / Red-30)
 4: φ3/8", Length:1.75 " - 16pcs (Black-8 / Red-8)
 5: φ1/2", Length: 1.75 " - 10pcs (Black-5 / Red-5)
 6: φ3/4", Length: 1.75 " - 10pcs (Black-5 / Red-5)
 7: φ1", Length:1.75" - 4 pcs (Black-2 / Red-2)

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}