Search

Search

KWD 0
Color
– 1 +

Special Features

  • Double Sided Textured Holographic Build Plate: With two patterns in one plate, you get the benefits of both PEO and PET without the hassle of choosing. Enjoy the smooth diamond PEO on one side and the carbon fiber PET on the other, all on a single spring steel plate.
  • Excellent Adhesion: For your PEO + PET carbon build plate, we recommend rhese filaments and temperatures: PLA: 60~65℃; PETG: 70-80℃. The surface of the PEO printing bed is resistant to high temperatures of 150°C, and the smooth PET coating bed is resistant to high temperatures of 150°C. If you're using the X1/X1C/X1E printer, it's highly suggested to turn off "Enable detection of build plate position" for optimal results.
  • Cleaning and Maintenance: Be sure to wipe it clean and dry it before each use to avoid problems. If the board is stuck with fingerprints or oil, you can just wipe the surface with a wet paper towel and then dry it with a dry paper towel to keep it clean. It will be as good as new and the pattern can reappear!
  • Easy to remove: The surface of the printing plate is very soft, do not use a scraper or tool to try to remove the print, as you may damage the printing plate!!! After the model and plate have cooled, simply bend the plate to remove the model. Do not remove the model if the model and plate are still warm. To speed up the cooling process, you can remove the printing plate with the model in it from the printer.
  • Compatibility: 257 x 257 mm spring steel plate size is suitable for 3D printer Bambu Lab X1 / X1C / X1E / P1P / P1S / A1. Please confirm the size of your 3D printer before purchasing.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}