Our air pump plungers have been carefully designed to seal the air bladder with an anti-splash feature that prevents water from splashing out during unclogging. This ensures a clean and tidy unclogging experience, minimizing any mess or inconvenience. It allows you to maintain a hygienic environment and provides a hassle-free unclogging process.
Toilet unclogging head: specially designed for toilet unclogging head, elbow airbag design, close fit, not easy to hurt the glaze, toilet use 3-4bar
Washbasin unclogging head: washbasin blocked, don't worry, use it on the right, a key unclogging fast and easy, sink use 1-2bar
Basin, floor drain unclogging head: unclogging head fit the sink, floor drain sink mouth, gently press the use of convenient, it is recommended to use 5-6bar
Converter elbow: the unclogging head can be used directly or connected to the converter to use, according to the clogging of the pipeline situation for free choice.
Seals and Gray Column
1. Ensure that the seal is installed in the correct position and orientation
2. Ensure that the hollow part of the gray column is pushed inwards
Procedure for use
1. Install the sealing ring and gray column
2. Rotate and tighten the two-part host
3. Plug into the inflate base
4. Push up and down to inflate
5. Take out the toliet dredge head and unscrew the product nut
6. Tighten the nut firmly with the toliet head
7. Keep the dredge in a vertical position inside the toilet
8. Press the tigger blockage is blown