Guidance how to use the Strulo heat Shrink Tape Prepare the surface: Ensure that the surface where you'll be applying the heat shrink tape is clean and free of any dirt, grease, or debris. Cleaning the surface beforehand will help the tape adhere better and provide a more secure seal. Cut the tape to the desired length: Measure the area you want to cover with the heat shrink tape and cut the tape to the appropriate length using scissors or a knife. Make sure to cut a piece of tape that is slightly longer than the area you want to cover to ensure complete coverage. Wrap the tape around the object: Place the heat shrink tape around the object or area you want to seal. Ensure that the tape overlaps itself slightly to create a tight seal. Apply heat: Once the tape is in place, use a heat source such as a heat gun or a hairdryer to apply heat evenly to the tape. Start at one end of the tape and work your way to the other end, moving the heat source back and forth to ensure uniform heating. Watch for shrinking: As you apply heat, the heat shrink tape will begin to shrink and conform to the shape of the object underneath. Continue applying heat until the tape has completely shrunk and formed a tight seal. Allow to cool: Once the tape has shrunk and formed a seal, allow it to cool completely before handling the object or applying any additional stress to the tape. This will ensure that the seal is secure and long-lasting. Inspect the seal: After the tape has cooled, inspect the seal to ensure that it is tight and secure. If there are any areas where the tape did not shrink properly, you may need to reapply heat or add additional layers of tape for added strength.he Strulo Heat Sealent tape is being used when a permenat waterproof tape sealent in needed