Search

Search

2pcs L298N Motor Driver Board Control Module with 4pcs TT Motor Kit DC Gearbox Motor Soldered with 2Pin Male Dupont Wire Dual Shaft DC3-6V Ratio 1:48 200rpm

KWD 7
Brand
Wishiot
Category
Electric Motors
Weight
171 g
– 1 +

Special Features

  • 1, L298N Motor driver with TT motor kit, is a good choice for smar car RC model, robotics, compatible for arduino Raspberry Pi and ESP32-CAM. The motor is pre-soldered with male dupont cable, which makes it easy for you for the wiring.
  • 2, Motor Drive Control Module: L298N is used as the main driver chip, it is dual channel H-bridge driver. It has the strong driving ability, low calorific value and strong anti-interference ability. Please use an external 5V logic supply if you use more than 12V driving voltage, otherwise, it is very easy to damage the voltage stabilizing chip.
  • 3, It is DC Gearbox TT Motors with a gear reduction ratio of 1:48 at speed 200rpm, dual shaft, and the motor is soldered with 2P male dupont wire. Perfect for plugging into a breadboard or terminal blocks.
  • 5, What you will get: 4pcs TT Motor with 2P dupont wire, and 2pcs L298N Motor Driver Control Module.
  • 【 Any questions?】Please click “Wishiot”(you can find "Sold by Wishiot" under Buy Now button), in the new page, click “Ask a question” to contact us

Description

L298N Motor Driver Board Control Module Dual H Bridge

Description:
Double H bridge drive
Chip: L298N
Logical voltage: 5V
Drive voltage: 5V-35V
Logical current: 0mA-36mA
Drive current: 2A(MAX single bridge)
Max power: 25W

DC Gearbox TT Motor Dual Shaft DC3-6V Ratio 1:48 200rpm with Soldered 2Pin Male Dupont Cable

Description:
This is a TT DC Gearbox Motor with a gear ratio of 1:48, plastic dual shaft, and it pre-soldered with 2P 2.54mm male connector dupont wire. Perfect for plugging into a breadboard or terminal blocks.
Rated Voltage: 3~6V
Continuous No-Load Current: 150mA +/- 10%
Min. Operating Speed (3V): 90+/- 10% RPM
Min. Operating Speed (6V): 200+/- 10% RPM
Torque: 0.15Nm ~0.60Nm
Stall Torque (6V): 0.8kg.cm
Gear Ratio: 1:48
Body Dimensions: 70 x 22 x 18mm
Wires Length: 200mm 28 AWG

Package Included:

2 X L298N Motor Driver Module
4 X DC Gearbox TT Motor with Soldered 2P Male Dupont Cable

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}