EZ-Tint 100 Gram Pack (Brown) – Concentrated, Fine, Powdered Tint – Compatible with All Liquid Epoxies and Polyesters

Does not migrate out of epoxies like mica or liquid tints.
Much less tint required compared to liquid tints.
If adding to a two-part epoxy, mix the epoxy first, then add in small amounts of tint into the epoxy liquid or paste until the desired depth of color is reached.
If adding to a polyester, stir in small amounts of tint to the uncatalyzed liquid or paste polyester until the desired depth of color is reached. Add tint in slowly under as high of a sheer as possible to ensure it dissolves thoroughly. Once tinted, add the catalyst.
If adding into any liquid, mix tint in with a drill attachment for 30-45 seconds at high speed in order to disperse it properly.
If adding into any paste, mix tint in thoroughly for one minute using a putty knife or mixing stick.
Coverage: 2 – 4 grams will tint approximately 4 fluid ounces of any liquid or paste. Add more or less tint to reach the desired depth of color.

Epox-Sci EZ-Tint 100 Grams (Brown)

Hello,