Search

Search

Ratio 3:1 Heat Shrink Tubing Colored Dual Wall Adhesive Lined Heat-Shrink Tube Wire Shrink Wrap Electrical Cable Wire Kit Set Insulation Protector Connector Heatshrink Tubing, 138PCS/9 Size

KWD 4.500
SizeRatio 3:1
Style138pcs Colored
– 1 +

Special Features

  • [ 3:1 Shrink Ratio ] - When heat is applied, this wire shrink wrap tubing will recover to a 1/3 of its original diameter, and makes a tight seal. 3:1 heat-shrink tubing shrinks around wires and terminals more tightly than 2:1 shrink ratio tubing, eliminating any air gaps.
  • [ Dual Wall Shrink Tubing ] - Dual Wall adhesive lined heat shrink tubing. Glue On The Inner Wall. When heat is applied, adhesive on the inside comes out and seals the connection, creating waterproof and long-lasting insulation. Dual wall tubing design has the increased ability to stand up to wear and tear. This wire heat shrink tubing is flame retardant.
  • [ Variety Of Sizes ] - Total 138pcs ratio 3:1 heat shrink tubings. We have included the 9 most typically used diameters ranging from φ0.063" to φ0.6". Heat shrink assortment designed with the length of 1.18 and 2.36 inch . Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications.
  • [ Safe & Premium Quality ] - Made of high quality polyolefin. Our Heat Sink Tubing possesses excellent flame retardant and insulation performance. Good tightness, acid and alkali resistance, durable and anti-aging. 3:1 stronger retraction ratio makes it more suitable for fitting the broken wires, electrical insulation, wire connection etc.
  • [ Fast Shrinkage ] - Slide the wire shrink wrap over your connection point and apply heat. Then the wire heat shrink will wrap the wire tight and evenly within seconds. Use innhom heat shrink tubes instead of ugly and short-lived electric tape. For best results we recommend using a heat gun.

Description

138pcs Colored Ratio 3:1 Heat Shrink Tubing
Specification:
Diameter: 9 Size
Shrink Ratio: 3:1
Color: Colored
Material: Polyolefin
Minimum Shrinkage Temp: +70°C
Full Shrinkage Temp: +100°C Maximum
Operating Temperature: -55°C to + 125°C
Flammability: Flame Retardant

How to use?
1. Select the proper size.
2. Insert the wires to the heat shrink tubing.
3. Use the heat gun or lighter to shrink the tube.
4. Don't touch the tube until it is cool completely.
Note: Keep about 1/2 inch distance when using the lighter to shrink the tube, or it may leave a black mark on the tube.

Package:
1: φ0.252", Length:2.36" - Yellow - 6pcs
2: φ0.311", Length:2.36" - Blue - 5pcs
3: φ0.374", Length:2.36" - Red - 4pcs
4: φ0.125", Length:1.18" - Black - 20pcs
5: φ0.094", Length:1.18" - Black - 30pcs
6: φ0.063", Length:1.18" - Black - 55pcs
7: φ0.5", Length:2.36" - Green - 4pcs

8: φ0.6", Length:2.36" - White - 4pcs
9: φ0.189", Length:2.36" - Clear - 10pcs

Applications:
Covers all gauges of wires you'll need in RC hobbies and many other applications.
Mainly used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components. It can be used in a variety of applications such as:
Electrical insulation
Environmental seal to protect from moisture, UV and fuel
Strain relief for electrical terminals
Identifying wires and cables (color-coding)
Grouping loose wires (usually in wire harnesses)
Creating thermal insulation for heat sensitive components

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}