Gizmo Dorks metal bronze fill filament is a unique filament blend that allows distinct prints with a metallic look and finish. Metal bronze filament is a special mix made by combining real bronze powder with PLA filament, and the filament prints very similar to normal PLA. Bronze filled filament imparts the look and feel of bronze giving the printed part a sculpted bronze finish look. The finished part will look laser sintered. The filament can be printed on either heated or non heated build plates. The suggested build surface to print on is blue painters tape, and there is essentially no warping. If a heated build plate is used, then please set it to 60 C, and the print will have an increased adhesion to the platform. Metal bronze fill filament can also be printed on regular glass, glass with glue stick, or kapton tape.

Extrusion Temperature: 190 - 225 C
Heated Bed: Not required but recommended at 60 C
Diameter: 1.75mm
Diameter Range: +/- 0.03mm
Net Weight: 200 grams
Gizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool.