The overload protector can play the role of over current protection and short circuit protection to protect the power circuit and avoid overheating due to overload. When the load is too large, it will automatically reset, and the power supply device will automatically disconnect the power supply. After disconnection, press the reset button switch to use it again.
Circuit overload protector, is in size of : 20A current, AC125/250V DC32V, 2 pin, 47mm x 28mm x 13mm/1.85-inch x 1.1-inch x 0.51-inch(L*W*H) total size
Push button manual reset, protection circuit; Waterproof button cap; Easy installation, simple operation; Small size, light weight, easy to carry
Steps of installation: 1. Select overload protector with appropriate specification; 2. Remove the overload protector to be replaced; 3. Installation
Please pay attention to select the overload protector with suitable specifications, especially the rated current and voltage of the overload protector
MECCANIXITY 18pcs Glass Tube Fuses, Axial-with Lead Wire 6x30mm 15A 250V for Replacing or Repairing Many Home Electronics (F15A)
KWD 2.500
MECCANIXITY Distribution Protection Box 160mmx120mmx95mm and Low-Voltage Miniature Circuit Breaker 2 Poles 32A 400V Set of 1
KWD 10.500
MECCANIXITY 5A 250V Glass Fuse 6x30mm Time Delay Fuse UL Listed Slow Blow Fuse for Home Appliances(Pack of 10)
KWD 3.500
MECCANIXITY 3.15A 250V Glass Fuse 5x20mm Time Delay Fuse UL Listed Slow Blow Fuse for Home Appliances(Pack of 20)
KWD 3.500
