Search

Search

1/4" 3/8" 1/2" 3/4" 1" 12VDC Normally Closed Brass/Stainless Steel Electric Solenoid Valve (1/2 inch, Stainless Steel)

KWD 16.500
Brand
HSH-Flo
Category
Fittings
Weight
0.8 kg
– 1 +

Special Features

  • 12VDC Normally Closed Direct Acting, Wet Armature Design;
  • 1/2 inch NPT Manufactured With a NBR Seal Stainless Steel Valve Body;
  • Suitable for Use with Hot or Cold Water, Gas, Air, Very Low Viscosity Fluids (< 20 Cst), Oils and Hydrocarbons, E.g., Gasoline, Kerosene, or Diesel Fuel.
  • Constructed with Industrial Grade Stainless Steel, This Valve Is Very Durable and Resilient, Leak Resistant, Corrosion Resistant, and Optimal for Higher Pressure and Temperature Projects. it Can Be Use with Drinking Water or Other Water Projects, Gasoline, Diesel Fuel, Kerosene Oil, Natural Gas, Air Etc.
  • This Valve Is Not a Continuous Duty Valve and Should Not Be In Continuous Use for More Than 8 Hours In a Single Cycle; To Do So Will Shorten The Life of The Valve and May Cause The Core of The Valve to Burn Out

Description

Brand:HSH-Flo;
Model: 2W-15-12V;
Voltage: 12Volt DC;
Suitable Media: Water Oil Air;
Valve Type: Direct Acting, Wet Armature;
Inlet/Outlet Ports: 1/2" Female NPT Threads;
Operation Mode: Normally Closed;
Seal Material:NBR
Body Material: Stainless Steel 304(CF8);
Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil);
Minimum Operational Temperature: 14 Degrees Fahrenheit (-10 Degrees Celsius);
Maximum Operational Temperature: 212 Degrees Fahrenheit (100 Degrees Celsius);
Operating Viscosity: Under 20CST
Installation: Fluid direction should be as the arrow shows

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}