1. [MULTIFUNCTIONAL DESIGN] Offering precise and efficient cutting experience for stone and concrete materials with this dust collector attachment.2. [IRON MATERIAL] Made from materials with compression and wear resistance, ensuring long-lasting use without damage.3. [EFFECTIVE DUST PROTECTION] Attachable to angle grinders, preventing dust from flying during the cutting process for added safety.4. [SECURE INSTALLATION] Equipped with adjustable fixtures to ensure a solid connection to the cutting tool, preventing detachment.5. [CONVENIENT DISASSEMBLY] Quick disassembly and installation for and maintenance, prolonging the lifespan of the dust .Spec:Item Type: Angle Grinder Dust CoverMaterial: Iron, PA66Weight: Approx. 548g / 19.3ozProduct Size: Approx. 178x166x42 mm / 7.01x6.54x1.65 inBase Plate Slot Width: Approx. 21 mm / 0.83 inDust Port Width: 35mm / 1.4inAngle Adjustment: 0 to 45 degreesSuitable for Saw Blades: 100 to 135How to Use:1. Install the cover on the right side of the grinder: Push forward to cut and suck dust.2. Install the cover on the left side of the grinder: Pull backward to cut and suck dust.3. When cutting downwards, align the front end of the base plate with the board surface. Cutting in the opposite direction or with the base plate of the cutting cover suspended or leaking will cause dust spattering.4. For angle cutting: Loosen the front hand screw and the rear hand screw, adjust the cutting angle.Note: Before actual use, ensure that the fasteners and saw blades are securely installed.PackageList:1 x Angle Grinder Dust Cover1 x Thickened Pad1 x Inner Ring1 x Adapter1 x Manual