The best for inlay work and saddle slotting! Solid carbide lasts far longer than steel, and reverse spiral flutes cut downward for cleaner, "no fuzz" edges in routed cavities.
Each bit is 1-1/2" (38.10mm) long and has a 1/8" (3.18mm) shank to fit Dremel®, Foredom® and other rotary tools. Use the larger bits for removing wood in the middle of your inlay work, and save the fine bits for the fine details. The fine detail bits are fragile, for routing intricate details only.
Set of 5 bits includes:
2 bits for inlay routing and bridge saddle slots: 1/8" (3.18mm) and 3/32" (2.38mm) width of cut
3 bits for fine detail inlay routing: 1/16" (1.59mm), 3/64" (1.19mm), and 1/32" (0.79mm) width of cut