Search

Search

Upgraded All Metal Smart Hotend with Plated Wear Nozzle 0.4mm 12V Compatible with Prusa i3 MK3 MK3S DDB Extruder 3D Printer Replace V6 Hotend (12V)

KWD 4.500
Brand
POLISI3D
Weight
50 g
– 1 +

Special Features

  • This is a drop in All Metal Conversion kit Compatible with V6 Hotend printers. It requires absolute zero modification of the printer to install. Our uniquely designed cooling block reduces the area requirements for the heat sink.
  • By installing thin stainless steel tubes inside the cooling block, heat can be dissipated faster while providing excellent thermal insulation between the heater and the cooling block. According to our test, the effect is the same as the crazy hot end, and it can print perfectly for PLA, ABS, PETG, TPU and other materials. For the aluminum heat sink, it means that the hot end can be lighter
  • Nozzle: 0.4mm for 1.75mm filament use. The nozzle material is brass to keep good thermal conductivity, the Nickel coating can increase the lifetime of the nozzle and prevent the nozzle surface Oxidation, And Nickel plating has High hardness and wear resistance, Apply Nickel plating on the nozzle surface can reduce the friction, to make it smoother when inputing filament
  • Heatsink material: Aluminum; Heater block material: Aluminum ;threaded gold color part is made from Copper, installed with heatsink by an stainless steel tube
  • Nozzle: 0.4mm for 1.75mm filament use; Heater: 12V 40W 1meter long; Thermistor : HT-NTC100K 3950 With M3x15mm sensor, which can reach up to 300degree

Description

Packakge: 1set hotend kit wth heater and HT-NTC100k thermistor (you need to install heater and thermistor into the hotend, which is very easy, please know); The Firmware for the thermistor, that is the same to the normal NTC100K 3950B thermistor, you should choose number 1 in Marlin firmware.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}