Monocure3D Rapid Resin FLEX100™ has an extremely high degree of flexibility allowing you to print compressible and bendable models.
Monocure3D Rapid Resin FLEX100™ is specifically designed for use with LED UV CD printers such as the Wanhao D7 or Anycubic Photon.
All Monocure3D resins have a very wide reactivity range, with UV wavelengths from 225nm to 420nm.
By using a mixture of photoinitiators, monomers and sensitizers, almost any UV light source can be used to initiate the polymerization process of our resins.
The viscosity of the FLEX100™ resin is 30-50cps at 25°C (Brookfield RVT).
All of our resins are low odour, have no VOC emissions and show very low shrinkage properties Please store the resin in a dark, cool place away from direct sunlight.
The thinner the model, the more flexible it becomes.
FLEX100™ can be used alone or by mixing with our Rapid Resin range to produce varying degrees of flexibility and strength.
Adding a small amount of FLEX100™ to the Rapid Resin would result in a less brittle and more durable part.
When larger quantities are added, it becomes more flexible.
Remember to weigh the resin with a scale so that the results can be repeated.
We recommend you mix 100 grams at the same time to keep the ratios simple.
For example, for a firm, durable mix, try a 25: 75 mix - 25 grams FLEX100 to 75 grams of rapid resin.
For a very flexible version, you can mix a 90:10 mix - 90 grams FLEX100™ and 10 grams of rapid resin.