The valve is made of industrial grade brass, corrosion and rust resistant and moisture resistant, optimal for high temperature and high pressure projects, can be used with water, oil and gas.
This valve was manufactured with VITON seals. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals. IP65 rated, outdoor waterproof coil, stable performance, safe and no leakage.
This is a high pressure normally closed solenoid valvethat opens when energized to a pressure of 2KG and closes when de-energized, with a maximum withstand pressure of 16KG. Horizontal mounting is recommended, if you need to install vertically, please consult with AOMAG. from the parts to the finished product of AOMAG strict control of every detail, the life cycle of this valve is far more than one million times.
PLEASE NOTE:This valve is NOT a continuous duty valve and should NOT be energized for more than 1 hour at a time. The coil will heat up during operation. Otherwise, it will shorten the life of the valve and may cause the spool to burn out. If your project requires a continuous duty valve, please search for AOMAG Motorized Ball Valves.
AOMAG normally closed electric solenoid valve is constructed with a durable brass body, 20mm (3/4") female threaded (NPT) connections, and heat resistant Viton gasket. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (<20 cst), oils and hydrocarbons.
1/4" NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by AOMAG
KWD 8
Motorized Ball Valve 3/4" Stainless Steel DC 24V NPT 3 Wires 2 Control Outdoor Waterproof
KWD 20.500
Normally Closed Water Fountain Solenoid Valves, 3/4" NPT AC 110V Stainless Steel VITON Electric Underwater Solenoid Valve for Water, Air, Oil, Fuel
KWD 23.500
Solenoid Valve 12V for Air co2 Water 1/4 Inch NPT 2 Way Normally Colsed
KWD 4
