Coolerguys 3.5 Inch Single 60mm Fan Cooling Kit

840556074151
This particular kit is for a single fan unit meant to cool your cabinet, audio visual system, aquarium, home grow op, brewing project or whatever else that may need cooling, the only limit is your imagination!
This kit can move 16 cubic feet (WxHxD) of air per minute (CFM) at 19 decibels and is perfect for any enclosure where active airflow is needed, noise is a factor, and space is constrained.
Can be mounted on any side of a cabinet, where room permits (cutout dimensions 2.5" x 2.5"). Insert the completed cooler assembly in hole and attach with the appropriate screws. The fan can be set to be either an intake or exhaust, simply mount the fan to the bracket pointing in the desired direction before installing (if you are looking at the label the air will flow towards you).
DC Fan Size: 60x60x25mm
Bearing Type: Dual Ball Bearing
Fan Speed: 2900 +/- 10% RPM
Noise Level: 19 DBA
Rated Voltage: 12 Volt
Input current: 0.04 Amp running
Max Airflow: 15.78 CFM
Connector: 3 Pin w/ 18" Tail
Certifications and Listings: RoHS and CE Compliant.
Kit Contents:
(1) 100-240vAC to 12vDC Power Adapter with 60" Tail
(1) 12vDC Quiet 60mm Fan
(1) 3.5" x 3.5" Thermoplastic Bracket
(2) 60mm Fan Grills
(4) Nut and Bolt Sets
(4) Cabinet Wood Screws
(1) 6-inch 2.1mmx5.5mm Female Barrel connector to 3pin fan adapter cable

If you need additional information you can contact us!