The ElasTech 6-Foot Y-Leg Shock Absorbing Lanyard with Aluminum Rebar Hooks features Y-leg construction for 100 percent tie-off and utilizes 1-5/8-inch tubular polyester webbing for resistance to UV light and abrasion, with a tensile strength of 8,500 pounds. An internal band of high-modulus elastic allows the lanyard to expand and contract from 4-1/2-to-6-feet to avoid tripping hazards. This lanyard also features a forged double-locking Offset snap hook at the attachment end and 2 aluminum rebar hooks at the anchorage ends. The internal continuous-length shock absorber limits arresting forces to 900 pounds or less. ElasTech shock absorbing lanyards have all of the advantages of our popular Internal Lanyards, plus the added benefit of elasticity. Since they easily expand and contract, you get all of the protection you need without any of the hassle. Internal Shock Absorbing Lanyards are constructed using a variety of tubular webs. Inside the tubular webbing is a continuous-length polyester web shock absorber. In the event of a fall, the compressed lanyard expands while dissipating the forces and arresting the fall. The tubular web also acts as a fail-safe, as it will not allow the lanyard to expand beyond the OSHA and ANSI limits for deceleration distance. Internal lanyards are an effective, lightweight alternative to traditional pack lanyards. All of our lanyards are designed to meet or exceed applicable OSHA and ANSI standards.