Specification
Name: 1/4 inch pneumatic connector pipe plug
Colour: Black
material: plastic
Outer diameter of pipe end: 1/4inch
Outer diameter of cap end: 7mm/0.27inch
Total length: 33mm/1.3inch

Instructions for use!
Do not exceed 145Psi pressure.
Working temperature: 32-140 degree Fahrenheit. Please do not use it outside the temperature range to prevent the sealing material from being deformed and easy to leak.
Do not use in places with excessive dust or particles
Do not use any medium other than air. This product is limited to air or vacuum environment.
After the connection is completed, please gently pull the tube with your hands to ensure that it is completely connected and will not fall off.
Ensure that the cutting surface of the pipe is vertical, the outer circumference of the pipe is free from scratches, and the pipe is not oval.
Do not apply additional external loads (bending, twisting or pulling) on the pipe joints, otherwise damage or leakage may occur.
When inserting the pipe, it must be inserted into the bottom of the joint. Failure to insert the pipe into the bottom may cause air leakage.