Search

Search

FYSETC Prusa I3 MK4 LED Light Kit - Dual Light Bar 24V - 3D Printer Lamp Strip: Ultra Bright Upgrade Part Easy Install on Original MK4 CNC Frame Profile Connecting xBuddy Mainboard with Power Switch

KWD 9.500
Brand
FYSETC
Weight
122 g
– 1 +

Special Features

  • 1. Prusa Upgraded DIY Accessories: This Light bar kit is for Prusa MK4, Dual Light version, which makes your printing area no longer dark. Good modification allows better viewing of the printing work and printing progress, no need to use a torch anymore. This is the dual light model with separate Z axis tops and light frames. You can observe your carefully printed 3D works at 360° without dead ends, operation of the printer, replacement of consumables, etc.
  • 2. Package Content: The light base kit contains hardware parts w/o printable parts, including 2x 24V LED strip, 2x Aluminum u-channel, 1x ON-OFF Power switch, 1x Heat shrink tubing, Wire with Fork terminals, Replacement zip tie. Just the electrics so you can print your own custom colored mounts from Official PRUSA, model file route: Prusa - 3D Models - Accessories, search: LED Light Bar Prusa MK4. If for MK3 MK3S MK3S+MK2 series, you need to print a separate holder and modify the light strip.
  • 3. Energy Saving: The LED strips can be powered by the printer power supply or connect the controller board. Use standard 24V. Our printing lamp has two colors - Yellow(W-) and White(C-) as marked. If 2 light bars light only one color, the power is ONLY 2W, If meanwhile lighting 2 colors on each bar( you need to add wires and power switch), the power is about 4W. Note: Our device only support 2 light strips light one color to avoid overload, recommend the WHITE for better luminous efficiency.
  • 4. Easy Installation: Use a simple soldering iron solder the wire on to the small Mechanical switch. Press the switch to turn on or turn off the LED strip, controlled individually. Whenever you need to check the printing work, just walk to the printer to turn on the lamp. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look. Mounts also include an opening to insert a power switch.
  • 5. No Strobe, more comfortable for your eyes: Upgraded LED light source, stabilized constant current. Uniform of luminance, soft light, not harsh to the eyes, which creates a comfortable and even healthy spatial light sense. Low light wane, Long service life. The LED strip brightness is default to the brightest and cannot be adjusted.

Description

FYSETC 3D Printer LED Light 24V Lamp Strip w/o printable parts Upgrade Kit for Prusa MK4, Dual Light Version, ON-OFF Mechanical Power Swtich Control. Upgraded LED chip, energy and power-saving. Good chip and luminous efficiency, low light wane, long service life. Uniform of luminance, soft light.
Features: The light bar is installed via a lightweight aluminum bracket, U-shaped slot, which can better heat dissipation; The outer of the light strip is covered milky transparent lampshade, achieves better light transmission, a overall beautiful appearance, easy to install.

NOTE:
I.Please pay attention to the connection of Positive (RED 24V+) and Negative(Black C-/W-) poles.
II.The LED Light is ONLY suitable for 3D printer with 24V power supply.
III. This is MK4 dual light version, not single light. Not directly use on Prusa XL, Mini/Mini+, MK2, MK3, MK3S, MK3S+, you need to print the relative light holder mount from Official and modify the light strip via the marked dotted line. Not for Crealty Ender 3 V2, CR-10 S4 S5, K1 Max, SV06 Plus, Voron2.4, QI DI x-pro etc
Energy Saving: The Prusa MK4 LED Lamp is ONLY 2W when it's working. And it is powered by the 3d printer power supply, connecting with the motherboard, no external power supply is required if 2pcs use a single color.
Printeable Files: Not come with the printed parts, then you can print them with your favorite 3d printing material and whatever color you like to match your whole printer.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}