LDR 311 CR-12 Galvanized Cross, 1/2-Inch
Size 0.5 Inch
0.5 Inch
0.5 x 8 Inch
0.5 x 10 Inch
0.5 x 12 Inch
0.75 Inch
1 inch
1-1/2-Inch X 2-1/2-Inch
1-1/2-Inch X 2-Inch
1-1/2-Inch X 3-Inch
1-1/2-Inch X 4-Inch
1-1/2-Inch X 6-Inch
1-1/2-Inch X 7-Inch
1-1/2-Inch X 8-Inch
1-1/2-Inch X 9-Inch
1-1/2-Inch X 12-Inch
1-1/2-Inch X Close
1-1/4-Inch X 2-Inch
1-1/4-Inch X 3-Inch
1-1/4-Inch X 4-Inch
1-1/4-Inch X 5-Inch
1-1/4-Inch X 6-Inch
1-1/4-Inch X 7-Inch
1-1/4-Inch X 8-Inch
1-1/4-Inch X 9-Inch
1-1/4-Inch X Close
1-1/4-Inch x 12-Inch
1-Inch X 2-1/2-Inch
1-Inch X 2-Inch
1-Inch X 3-1/2-Inch
1-Inch X 4-Inch
1-Inch X 5-Inch
1-Inch X 7-Inch
1-Inch X 8-Inch
1-Inch X 9-Inch
1-Inch X 10-Inch
1-Inch X 11-Inch
1-Inch X 12-Inch
1-Inch X Close
1.25 inch
1/2-Inch X 1-1/2-Inch
1/2-Inch X 2-1/2-Inch
1/2-Inch X 2-Inch
1/2-Inch X 3-1/2-Inch
1/2-Inch X 3-Inch
1/2-Inch X 4-1/2-Inch
1/2-Inch X 5-1/2-Inch
1/2-Inch X 7-Inch
1/2-Inch X 9-Inch
1/2-Inch X 11-Inch
1/2-Inch X Close
1/4-Inch X 2-1/2-Inch
1/4-Inch X 3-Inch
1/4-Inch X 4-Inch
1/4-Inch X 5-Inch
1/4-Inch X 6-Inch
1/4-Inch X Close
1/4-Inch x 2-Inch
1/8-Inch X Close
1/8-Inch x 1-1/2-Inch
1/8-Inch x 2-Inch
2-1/2-Inch X Close
2-Inch X 3-Inch
2-Inch X 4-Inch
2-Inch X 5-Inch
2-Inch X 6-Inch
2-Inch X 7-Inch
2-Inch X 8-Inch
2-Inch X Close
3-Inch X 4-Inch
3-Inch X Close
3/4-Inch X 2-1/2-Inch
3/4-Inch X 2-Inch
3/4-Inch X 3-1/2-Inch
3/4-Inch X 4-Inch
3/4-Inch X 5-Inch
3/4-Inch X 6-Inch
3/4-Inch X 7-Inch
3/4-Inch X 8-Inch
3/4-Inch X 10-Inch
3/4-Inch X Close
3/4-Inch x 12-Inch
3/8-Inch X 5-Inch
3/8-Inch X 6-Inch
3/8-Inch x 1-1/2-Inch
3/8-Inch x 2-1/2-Inch
4-Inch X 4-Inch
Special Features
Hydrostatically tested
Rated at maximum 300 psi at 150Degree F
For use with drinking water
Galvanizing meets ASTM A-123 standards
Steel construction
Description
LDR 303 1X7 Galvanized Pipe Nipple, 1-Inch x 7-Inch. Hydrostatically tested. Rated at maximum 300 psi at 150Degree F. For use with drinking water. Galvanizing meets ASTM A-123 standards. Steel construction.
{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}
{"email":"Please enter your email address","email_i":"Invalid email address"}
Copyright © Tilga 2025, all rights reserved.
LDR 311 T-114 Tee, 1-1/4-Inch, Galvanized
KWD 3.500
-6%
Hydraulic Directional Control Valve - 2 Spool 21 GPM 3600 PSI SAE Ports Double Acting Hydraulic Valve for Tractors Loaders Log Splitters
KWD 43.500
Water Pressure Regulator 1000 Psi, DN20 3/4inch Brass Water Pressure Reducer 3/4'' 1.6MPa Adjustable Water Control Pressure Regulator Valve Thread
KWD 7
Watts 3/8 in Dual Check Valve, Atmospheric Vent, Wye Pattern Strainer, Female Npt Outlet Connection, SD-3-FN 3/8
KWD 65.500
