Product Description:
Signal Input: Single Port, Pulse / Direction
Subdivision: 1 / 2 / 4 / 8 / 16 / 32 Subdivision Optional
Output Current: 0.5 - 4.0A
Input Voltage: DC 9 - 42V
of Application:
- All kinds of small and medium-sized automation equipment and instruments, such as: engraving machine, marking machine, cutting machine, laser phototypesetting, plotter, CNC machine tools.
Note:
- In order to prevent the driver from being interfered, it is recommended to use shielded cable for the control signal, and the shield layer is short-circuited with the ground wire. The same machine is only allowed to be grounded at the same point. If it is not the real ground wire, the interference may be serious. At this time, the shield layer is not connected.
- Pulse and direction signal lines and motor lines and power lines are not allowed to be tied together side by side. It is better to separate them at least 10cm or more, otherwise motor noise will easily interfere with pulse direction signals and cause motor positioning inaccuracy, system instability and other faults.
- If one power supply is used for multiple drives, parallel connection shall be adopted at the power supply, and chain connection from one power supply to another is not allowed.
- It is strictly forbidden to plug and unplug the power terminal of the driver with power. When the motor with power is stopped, there is still large current flowing through the coil. Plug and unplug the power terminal will cause huge instantaneous induced electric potential to burn the driver.
- It is forbidden to connect the wire head to the terminal after tin plating, otherwise the terminal may be damaged due to overheating due to increased contact resistance.
- The wiring head shall not be exposed outside the terminal to prevent accidental short circuit and damage to the driver.
Package Include:
2 x Stepper Motor Drivers