Search

Search

CR-10S PRO All Metal Hotend Upgrade Kit,Titanium Alloy Heatbreak,MK8 Hardened Steel Nozzle 0.4mm for CR-10S PRO,CR-10S Pro V2,CR-10 Max,Ender 3 Neo,Ender 3 V2 Neo 3D Printer Hotend.

KWD 14.500
Brand
BZ 3D
Weight
55 g
StyleHardened Steel Nozzle Kit
– 1 +

Special Features

  • The Hardened steel nozzles,each of which is molded by five axle CNC.Strict quality control enables it to possess Higher temperature,Higher Wear Resistance,Better Durability,More Precise.Make the best efforts to achieve the best performance of the nozzle.Can be perfectly compatible with special filaments such as PEI,PEEK,PETG,Carbon Fiber Mixture,Glass Fiber Mixture,Filled PLA or Glow-in-the-dark filament.
  • If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament,special filaments then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles.We've developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the marke.
  • The Heatbreak material is upgraded from the original TC4 titanium alloy to GRADE5.High quality raw material.High precision production to provide excellent thermal isolation between heater and cooling block.The Nozzle and Heatbreak appearance is more shiny,thread precision improvement.The inner wall of the tube is smoother (reducing the chance of filament clogging).The interface is smoother and more precise (can effectively prevent the filament from leaking).
  • Heatsink and Heater Block Is high quality fine processing aluminum .It is not low quality or cheap aluminum.Coupled with high-precision CNC machining, and strict quality assurance Which brings the high-quality CR-10S Pro All Metal Hotend.
  • Compatible with CR-10 max,Cr-10S Pro,Cr-10S Pro V2,Ender 3 Neo,Ender 3 V2 Neo 3D Printer. After-sales guarantee: each defective item can be replacement for free or refund.If any question, please feel free to contact or QA us, BZ 3D is committed to providing you with the best service!

Description

Recommended slicer setting:
retraction speed over 80MM/S
retraction length 2.5-4MM

If you are facing PLA clogging problem, please try the followings:
1. Increase the retraction speed. The speed may have being limited in the firmware try to change it. G-command "M203 E200"
2. Increase the extruder acceleration. Check your firmware settings. G-command "M201 E9000"
3. Reduce the retraction length. It depends on your machine setup.
4. Increase the nozzle temperature by 5-10 degrees.
5. Do not install the 2 screws for support the heatblock like the stock hotend on the CR-10 printer.
6. Make sure that there is no gap between the heatsink and the heat breaker.

NOTE:
This product only supports 1.75mm filament!!!
We found that many customers do not know how to properly install the nozzle.Remember the core issues in the installation process.
Just make sure your nozzle and HEAT BREAK front end are tight and sealed. Otherwise, the filament will leak along the screw holes.

Packing list:
MK8 Hardened Steel Nozzle1.75/0.4mm x 1
Titanium alloy heat break 1.75MM x 1
Aluminum Heater Block x 1
Aluminium CR-10s PRO Heatsink x 1
Bowden Collets x 2
Gift：Silicone socks x 1

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}