Operating voltage Range: 3.0~5.5V; Operating Current: 50mA; Operating Temperature Range: -20℃-85℃; Interface: SPI, module size: 16 x 32 mm/0.63 x 1.26 inches; module interface: GND VCC SCK CS SO;
Embedded thermocouple break detection circuitry, using SPI 3 wire communication;Test Temperature Range: 0℃-1024℃, the converter temperature resolution is 0.25℃.
The internal integrated cold circuit compensation circuit has three simple serial interfaces, and the temperature signal can be converted into a 12-bit number.
The module is made of high-quality electronic components, high structural strength, impact resistance, strong electric shock resistance; thermocouple break detection, good conductivity, reliable operation and low power consumption
Wide range of applications: It can be widely used in industry, room temperature measurement, cable trough temperature bearings, cylinders, textile machinery, air conditioners, etc.
Description
Product Description:
- The MAX6675 uses a series K-type thermocouple converter with cold-junction compensation, linearity correction, and 12-bit resolution thermocouple damage detection.
- Test temperature range: 0°C-1024°C, converter temperature resolution is 0.25°C
- Interface: SPI
- Working voltage: 3. 0~5.5V DC
- Measuring range: 0℃~1024℃
- Converter resolution: 0.25°C
- Working temperature: 20℃~85℃
- ESD signal: 2000V
- Built-in cold junction compensation circuit.
- Embedded thermocouple fault detection circuit.
- Working current: 50mA
- SPI serial port temperature value output
- Module port: GND VCC SCK CS SO
Specification:
- Material: electronic components
- Module size: approx. 16 x 32 mm/0.63 x 1.26 inches
Package Contents:
3 x MAX6675 temperature sensor module
3 x K-type thermocouple sensors
3 x cable