3 Position Maintained Selector Rotary Switch - Waterproof Self-Lock Switch, 22mm Mounting Hole, NO/NO Control Function, 220VAC Voltage and 10A Contact Current - XB2-BD33 Model (1 Pack)
MAIN SPECIFICATIONS AND TECHNICAL DATA - Shopcorp Selector Switch offers a three (3) position self-lock switch with an 22mm mounting hole and a maintained (latching) operation type. This piece is robust and lightweight. It can also be connected as a normally open (NO) switch or normally closed (NC) contact. It is made of plastic, metal and electronic components. No battery required. The buttons conform to the GB/T14048.5 standard.
WORKING CONDITION - Operating/Insulation voltage: 220VAC and 380V respectively; Contact current: 10A; Installation dimensions: Φ22mm; Protection grade: IP55; Certification: CE, CCC; Operating temperature: between -25°C and +70°C; Operating humidity: 50%; Vibration resistance: 15g, amplitude is about 1.0mm; Electrical durability/life: 50,000 times; Shock resistance: 200g. Switch type: Selector Rotary Switch; Mounting Type: Panel Mount. This selector switch must be fixed to use on the panel
VERSATILITY - This is used in industrial controlling circuits of AC 50Hz or 60Hz, rated operational voltage up to 380V and below, DC operational voltage of 220V and below for controlling the electromagnetic starter, contactor, relay and other automatic control electric circuits. It can be used under harsh weather conditions because of the lock, fall and vibration resistance. Shopcorp Selector switches are widely used, including in many electrical appliances in the home
INSTALLATION AND DISASSEMBLY - To install, first you need to screw out the nut and fix the head. Then align the top of the head in the direction of the buckle and put the switch seat on. Finally, turn the buckle to the original position and clamp the head. To disassemble, first you need to pull the head out of the middle seat. Then, hook the convex point of the clasp with the index finger and pull gently. Lastly, move the buckle to the other side
STABLE WORKING PERFORMANCE - This Selector Switch is made of non-flammable materials and resistant plastic, ideal for use in high temperature environments. Also, its thick Aluminum Alloy circuit will protect the Switch Head giving it a long working life and anti-oxidant properties. Finally, its pure and thickened Metal Contact Base makes it possible for the switch to be used with 10 Amp current and can be replaced, as it is separate from the switch head
3 Pole Contactor 30 amp Normally Open IEC 660V Contactor Switch, Auxiliary 1NO/1NC - 110/120V Coil, Motor Load 32A, Lighting 40A, 50A - AC Contactor | Includes DIN Rail and Phillips Screws
KWD 19
3 pole Contactor 30 Amp Normally Open IEC 660V Contactor Switch, Auxiliary 1NO/1NC - 220 / 240VAC Coil Inductive 32A and Resistive 50A, AC Contactor - with Mounting Base for DIN Rail (2 pack)
KWD 16.500
Shopcorp 50 Amp 4 Pole Normally Open (NO). IEC 400V Contactor (Silent Operation) – 110/120VAC Coil, 40a contactor Motor Load and Lighting Load 60A with Mounting Base for DIN Rail
KWD 28
Shopcorp Small Push Button with Flat Head, N/C - On/Off, Start/Stop, Self-Resetting Momentary Switch for Home and Industrial Equipment (Red)
KWD 5
