✨【4K@120Hz Splitter 1 in 4 Out】 -- 4K 120Hz 4:4:4 48Gbps HDMI 2.1 Splitter with audio extractor can duplicating 1 HDMI source to 4 displays under same or different resolution simultaneously, as well as extracting the 5.1Ch audio signal through SPDIF port. Supports HDCP 2.2, HDCP 2.3 bypass. Comes with EDID management,Down scaler function. Works great with PS5, XBOX series, Nintendo Switch, NVIDIA, AMD, etc..
✨【Wide Compatibility】4K@120Hz HDMI 4 way splitter works great with QLED TV,HDMI 2.1 HDCP 2.2/HDCP 2.3 devices,Gaming Consoles like Xbox,,PS4, PS5, Nintendo Switch; Streamers like Apple TV, Fire Stick, Roku; NVIDIA and AMD graphics cards. Plug and Play, No driver needed. To get both of D-olby Atmos and D-olby Vision, please make sure both TV and Receiver support them.
✨【Please NOTE】1.Re-powering and unplugging the HDMI cables is a common troubleshooting method. 2.This splitter supports only mirror, duplicate or copy from 1 HDMI source. It does not support extend mode. 3.Soundbar should have at least 1 HDMI IN port to work properly. 4.This splitter does not support CEC, ARC or e-ARC. 5.Certified HDMI 2.1 cables less than 10ft/3m are recommended since most using issues are cuased by poor quality cables.
✨【Working with Capture Card】 -- When working with Elgato HD60X capture card, please follow instrution below to get the highest stream or record resolution. 1. Connect the capture card to OUT1 and display device to OUT2. 2. Set EDID to Copy mode. 3.Please note that HD60X support resolution up to 4K@60Hz or 1080P@120Hz refresh rate and automatically transfer to 60Hz when streaming or recording. To enable VRR function, please set resolution to 1080P@120Hz in your HDMI Source like PS5 and XBOX.