☆Multi-functional LCD charging display, For battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V (IMR), charging capacity, voltage and current: 0.5A/1A/2A,Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V (IMR).
☆Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.
☆Multi-power input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter, four independent charging and micro computer management system.Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA),2000mA is fixed only for slot#4.
☆Note:Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit,If DC input, only 12V 1A is recommended,Mind heating while charging,Remove the charger from power source after charging complete, and remove the battery from the charger at the same time.For indoor use only.