Easily-to-Install Q UP Tonearm Lifter Adds Convenient, Automatic Tonearm-Lift Functionality to Almost Any Manual Turntable: Never Worry About Remembering the Last Track on an LP Add automatic tonearm-lift functionality to almost any manual turntable with the Q UP tonearm lifter . Many ‘tables require you to grab the tonearm at the end of a record, but we know this can be an inconvenience. Q UP takes any worries about having to remember the last track on an LP by picking up the tonearm and lifting the needle out of harm's way when a record finishes playing. Since it doesn't interact with the tonearm until the end the playing cycle, Q UP doesn't impact tonal balance or system performance. This trigger-and-lift design is easy to install and compatible with almost every ‘tonearm on the market, independent of shape, thickness, or height. Awesome, and 100% Music Direct Guaranteed. “A boon to the analog lover—and the lazy.” — The Absolute Sound , Editors' Choice Award Compatible With Almost All Bearing Tonearms Q UP can be used with most bearing tonearm types, from uni-pivot to gimbal. However, Q UP is not compatible with linear tracking arms. If you have a question about your particular setup, please contact Music Direct. Q UP requires a flat space near the tonearm with approximately 0.55" (14mm) of plinth space near the tonearm. The minimum height between the plinth and the bottom of the tonearm when playing a record is 1.42" (36mm). Most tonearms and turntables fit these criteria. NOTE: Pro-Ject Debut Series tonearms can use a Q UP without its base; all that's required is double-sided tape to affix the Q UP to the platform. Three Different-Sized Lifters Included With Q UP Variations in height between the plinth and the bottom of the tonearm are common, so Q UP includes three different-sized lifters: 10mm, 20mm, and 30mm. Easily affixed to