Search

Search

Tech Essentials KIT K5 PRO KRYO33 3g, CS-Flux 5g, K5 PRO 10g Compatible with Apple iMac, Asus ROG, Acer Nitro, MSI laptops, RTX 3080, PS4, Nintendo Switch, Xbox, CSGR

KWD 12.500
– 1 +

Special Features

  • K5-PRO is a high quality gummy / sticky thermal paste designed for use on memory chips and other components where thermal pads are originally used. K5-PRO can replace soft thermal pads that are used on computers (best performance up to 1mm, maximum gap that can be filled up to 3mm).
  • K5-PRO has thermal conductivity K>5,3 W/m.K * (at least 3 times higher than common thermal pads that are used on computers and commercial electronics) .K5-PRO is applied very easily directly on the component and has no electrical conductivity. Operational temperature -90 to 250 degrees (Celsius).
  • CS-FLUX when heated at around 150 degrees (Celsius) turns into liquid and covers the small gap between the BGA component and the PCB complitelly. This way all solder balls are covered with CS-FLUX and durring reflow or removal of the BGA componets all PCB and componet pads and balls are protected from oxydation. CS-FLUX is no clean flux and causes no corrosion if not cleaned, but if needed it can be cleaned very easily with alcohol. It causes no corossion on the PCB or components.
  • KRYO33 has thermal conductivity > 13W/mK *. Thermal resistance < 0,004 K/W. Maximum possible thermal conductivity (for not electric conductive pastes).
  • KRYO33 is Ideal for over clocking since it is superior to any thermal paste originally used by manufacturers. No curing time (system can be used immediately after application). Long service time (at least 8 years after application).
  • KRYO33 can be perfectly combined with K5 PRO since both consist of very small particles. This way they allow heat sink to reach minimum possible distance from warm component even if heat sink is not flat at all areas. At the same time all gaps between heat sink and component, even the invisible gaps on metal surface, are filled with thermal conductive materials.
  • KRYO33 has zero electric conductivity. Can be applied on all surfaces of electronic components and PCBs even on aluminum. Color Gray Specific gravity 2,9 (30% lower than competitive products so less weight is needed for same surface). Certification Reach, ROHS, CE Electric conductivity 0 pS/m Viscosity 120-170 Pas. Operation temperature -90 °C / +270 °C Designed and produced in E.U. (GREECE)

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}