Search

Search

USB Type-C Hardwire Kit Only for Miofive for S1 & Mini Series Dash Cam, Activate Parking Mode and Low Voltage Protection, 11.5 ft / 350 cm (Need Purchase Separately)

KWD 12.500
Brand
Miofive
Category
Car Electronics
Weight
199 g
– 1 +

Special Features

  • Type-C Hardwire Kit: This dash cam hardwire kit enables parking mode on the dash camera and is powered by a Type-C port, providing a steady 5V/2A output. The voltage input supports a range from 12V to 24V. The hardwire cable length is 11.5 feet (3.5 meters).
  • Wide Compatibility: The Type-C USB plug is compatible with all Type-C dashcams, GPS navigators, radar detectors, etc., freeing up the cigarette lighter for other devices. Please note: It doesn't work for other Miofive Dash Cams; it only works for S1 Series Dash Cam.
  • 24H Parking Monitoring: Miofive's vehicle hardwire kit (with USB Type-C Port Only), when connected to the power source from the fuse box or the car battery, can provide continuous power for 24 hours, even when the car is turned off. This ensures protection against theft when your car is parked in a lot.
  • Low Voltage Protection: It features a smart low voltage protection system that automatically shuts off power to your dashcam when the battery voltage drops to 11.6V or 23.2V. This prevents it from draining the battery and includes additional security safeguards, such as overheating, overcurrent, and short-circuit protection.
  • Easy Installation: Simple hidden wiring keeps the car neat and tidy, freeing up the cigarette lighter for connecting more devices. (TIPS: Please carefully read the quick guide titled "Before Installing" before use.)

Description

The Miofive Dash Cam Hardwire Kit is compatible with USB Type-C S1 Series Dash Cams.

⚇ WARM TIPS:

1. Please ensure that the ACC and BAT connections are correct.

2. Feel free to reach out to us if you require any professional assistance.

3. Please use the dedicated hardwire kit designed for Miofive S1 Series Dash Cams, as other brands of hardwire kits are not compatible with Miofive dash cams.

4. The length of this hardwire kit is 11.5ft, suitable for most trucks, SUVs, and other vehicles.

5. Note that installation steps may vary depending on the vehicle model and specific conditions. It is strongly recommended to consult the vehicle manual or seek professional assistance before installation.

☀ INSTALLATION INSTRUCTIONS:

1. Ensure that everything is prepared and safety measures are in place before installation.

2. Locate the car's fuse box, typically found under the dashboard on the driver's side or in the engine compartment.

3. Identify the ACC (Accessory) fuse slot in the fuse box, which provides power when the ignition is on. Also, locate the constant power fuse slot, which provides power even when the ignition is off.

4. Connect the red wire from the hardwire kit to the ACC fuse slot and the yellow wire to the constant power fuse slot. You can use a fuse tap or a fuse adapter for these connections.

5. Find a suitable grounding point near the fuse box, ideally, a metal surface securely connected to the vehicle's chassis.

6. Connect the black wire from the hardwire kit to the grounding point using a ring terminal or a suitable grounding connector.

7. Once all connections are secure, neatly tuck away any excess wires, ensuring they are safely routed to avoid interference with the vehicle's controls.

8. Test the hardwire kit by turning on the ignition. The dash cam should receive power and start functioning.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}