Search

N Lightning Arrestor Female to Female Bulkhead DC-3GHz 90V Gas Tube Discharge 50 Ohm RFetomax N Type Coaxial Lightning Arrester

KWD 6.500

Brand
RFetomax
Category
Surge Protectors
Weight
117 g
Colorlightning arrestor N female to female
1 +

Special Features

  • 1.Lightning arrester n type female to female,Body brass with nickel plated, inner gold pated, Teflon(PTFE) Insulator, pass 48 hours Salt spray test
  • 2. N type female to female Connectors 50 ohm , broad bandwidth DC-3 GHz Covers 2G 3G and 4G LTE Cellular , Insertion loss less than 0.2 dB ,VSWR less than 1.18
  • 3.N lightning arrestor with a 90V replaceable Gas Discharge Element with High Surge Power Capability and Bi-directional Protection
  • 4.50 Ohms Compatible with 50 Ohm Cellular Boosters, CATV, Satellite TV, Protects signal boosters from lightning strikes, Requires additional ground cable ,DC Pass for Remote Powering of Amplifiers and LNA's
  • 5. N lightning surge protector should be installed as close a possible to the equipment to be protected, often at the point where the coax cable enters the building

Description

RFetomax N Type Female to Female Bulkhead DC-3GHz Lightning Arrestor 90V Gas Tube Discharge 50 Ohm
2.Specification:
Frequency Range:DC-3 GHz
Attenuation :≤ 0.2 dB
VSWR ≤1.18
Peak Power(W) :200
Contact Resistance:Center conductor ≤ 1mΩ, Outer conductor ≤ 1mΩ
Insulation Resistance :≥ 5000MΩ Durability :≥ 500 cycles
Temperature range: -40°C to +85 °C
3.Materials :
Body brass nickel plated
Inner brass gold plated
Teflon(PTFE) Insulator
RoHS compliant
4.Package :
1 piece N-Type Female to N-Type Female lightning arrestor
5. Protects signal boosters from lightning strikes:
Prevent a lightning strike from destroying your electrical system.
The 50 ohm Arrester with N Female to Female Bulkhead Connectors can be installed to prevent expensive damage from incapacitating your circuitry.
The arrestor safeguards your amplifier and boosted devices from power surges caused by lightning strikes to antennas mounted outside
Arresters should be installed as close a possible to the equipment to be protected, often at the point where the coax cable enters the building.
They can also be installed near the antenna for additional protection.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}