Related Items

---

• SparkFun Qwiic Pro Micro - USB-C (ATmega32U4) - Compatible with Arduino development board 5V/16MHz microcontroller AP2112 3.3V Voltage Regulator Castellated PTH pin pads Reset button Maximum 6V input KWD 9
• SparkFun RedBoard Qwiic ATMega328P compatible with Arduino board w/ Qwiic Connector and CH340C Serial-USB Converter IC Breadboardable R3 footprint microcontroller Improved reset button KWD 9
• SparkFun GPS-RTK Board - NEO-M8P-2 (Qwiic) High-Accuracy breakout No Soldering Required Breadboardable Contains a Rechargeable backup battery allowing a Warm-start decreasing time-to-first-fix KWD 96
• SparkFun XBee Explorer Dongle - Red KWD 13.500
• SparkFun Qwiic Single Relay-Up to 5.5A at 240VAC Multiple I2C addresses Available Turn on/Off high Power Device from Low Power microcontroller No Soldering Large Power Loads w/Simple I2C Commands KWD 6
• SparkFun Teensy 4.1 ARM Cortex-M7 Processor at 600MHz with a NXP iMXRT1062 chip KWD 19.500
• SparkFun OpenLog Open-source data logger works over a simple serial connection Supports microSD FAT16/32 cards up to 32GB Configurable baud rates up to 115200bps Preprogrammed ATmega328 and bootloader KWD 7
• SparkFun Qwiic OpenLog Open-source datalogging Board Works over I2C Supports microSD FAT16/32 cards up to 32GB Configurable baud rates up to 115200bps Preprogrammed ATmega328 with Optiboot bootloader KWD 8
• SparkFun Thing Plus - ESP32-S2 WROOM -No Bluetooth- Highly-integrated Feather form-factor development board Equipped w/a 2.4 GHz WiFi System-on-Chip (SoC)- Transparent external flash & RAM encryption KWD 9
• SparkFun Pro Mini ATmega328-5V/16MHz Development board Compatible with Arduino boards and IDE KWD 4.500
• SparkFun Qwiic HAT for Raspberry Pi -Connect I2C sensors & accessories to a standard 2x20 GPIO header Pi Tin compatible 4 Qwiic connectors Daisy chain sensors & accessories Useful GPIO pins broken out KWD 3.500
• SparkFun FTDI Basic Breakout - 5V Development Tool with USB Mini-B connector KWD 7
• SparkFun Thing Plus - ESP32-S3 KWD 8.500
• SparkFun Qwiic HAT for Raspberry Pi KWD 4
• -10% SparkFun ESP32 Thing Developement Board WiFi & microcontroller compatible with Bluetooth for IoT & prototyping projects w/ Integrated LiPo battery charger 4MB flash memory 3 to 3.6V operating range KWD 9 KWD 10
• SparkFun MicroMod ATP Carrier Board-Modular interface ecosystem-Connect microcontroller/processor board to various carrier board peripherals KWD 8.500
• LilyPad LED White (5pcs) KWD 2.500
• SparkFun WiFi Shield - ESP8266 KWD 8
• SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A) - Easily Read Multiple sensors with The Same I2C Address Or Communicate with Multiple I2C Devices with Different addresses - Board only KWD 5.500
• SparkFun Thing Plus - ESP32 WROOM (USB-C) - ESP32-D0WDQ6 Chip Integrated RGB Status LED Operating Voltage: 3.3V Board Dimensions: 2.3in x 1.0in x 0.5in KWD 10.500
• SparkFun GPS Breakout - NEO-M9N, U.FL (Qwiic) Breakout No Soldering Required Breadboardable Contains a Rechargeable Backup Battery Allowing a Warm-Start decreasing time-to-First-fix KWD 28
• SparkFun MicroMod Input and Display Carrier Board-Modular Interface Ecosystem-Connect microcontroller/Processor Board to Various Carrier Board peripherals-2.4" TFT Display Screen Buzzer KWD 25
• SparkFun Qwiic Compatible with Micro:bit Breakout (with Headers)- Expands The Capabilities Compatible with Micro:bit- Fits Edge Connector- Broken Out 21 GPIO pins to Mail headers- 2X Qwiic Connectors KWD 4.500
• SparkFun RedBoard Artemis Arduino Compatible Microcontroller KWD 9
• SparkFun Thing Plus-Artemis Machine Learning Development Board Includes BLE 1MB of Flash USB-C Qwiic I2C MEMS LiPo Charger Compatible with Arduino IDE Platform Run TenserFlow Models Feather Footprint KWD 9.500
• SparkFun Auto pHAT Compatible with Raspberry Pi Google Coral NVIDIA Jetson and More All in One Robotics Package Quickly add functionality to Single-Board Computers Drive 2 Small DC Motors & 4 servos KWD 14.500
• SparkFun Micro OLED Breakout (with Headers) Screen Size: 64x48 Pixels (0.66" Across) Monochrome Blue-on-Black, SPI or I2C Interface, Pre-soldered headers, Operating Voltage: 3.3V KWD 7.500
• SparkFun Pro Micro - RP2350 Dual-core microcontroller - Development Platform - Compact Pro Micro Form Factor - Board Dimensions: 1.3in x 0.7in KWD 6.500
• SparkFun Qwiic dToF Imager - TMF8820-5000mm Detection Range - Direct time-of-Flight Sensor - Single Modular Package with an associated VCSEL - Based on Single Photon Avalanche Photodiode KWD 6
• SparkFun Qwiic Shield Compatible with Arduino Nano-connect the I2C bus (GND, 3.3V, SDA and SCL) to four Qwiic connectors (two horizontally and two vertically mounted)-daisy chaining-Soldering Required KWD 3.500
• SparkFun Thing Plus - SAMD51 Development Board Powerful microcontroller with Qwiic Connect System and Integrated Regulated LiPo Charger No Soldering Required KWD 9.500