RiDATA memory module is organized as 1024M x 64 bits in a 288 pin memory module, based on eight 1024Mx8 bit DDR4 FBGA components per module. Total kit capacity is 8GB (8192MB). The LO-DIMM is intended for use in applications operating up to 1600MHz clock speeds and achieves high-speed data transfer rates of up to 3200MHz.Memory heat sink, specially designed for computer memory heat dissipation, attached to the memory to increase the efficiency of heat removal. It is a passive heat dissipation element. Effectively assists memory cooling,All-aluminum material fully protects the memory.2. The material is a metal with good thermal conductivity, light weight and easy processing, which can speed up the heat conduction rate and strengthen the Cooling performance, reduce memory temperature, make memory more durable and stable, solve the problem that the memory is too hot and cause the computer to crash, and prolong the service life of the memory.3. Perfect protection and beautiful appearance. Features:DDR4 functionality and operations supported as defined in the component data sheet288-pin, (LODIMM)Fast data transfer rates: 8GB (1024Meg x 64)VDD = 1.2V (typical)VPP = 2.5V (typical)VDDSPD = 2.2–3.6VNominal and dynamic on-die termination (ODT) for data, strobe, and mask signalsLow-power auto self refresh (LPASR)Data bus inversion (DBI) for data busOn-die VREFDQgeneration and calibrationSingle-rankOn-board serial presence-detect (SPD) EEPROM16 internal banks; 4 groups of 4 banks eachFixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)Selectable BC4 or BL8 on-the-fly (OTF)Gold edge contactsHalogen-freeFly-by topology Ordering Information OptionsOperating temperature – Commercial (0C TOPER +85C)Package – 288-pin DIMM (halogen-free)Frequency/CAS latency