Parameters:
Input voltage: DC10V-60V
Input current：10A MAX
Quiescent current：10mA (12V to 20V, the higher the output voltage, the quiescent current will increase.)
Output voltage：12-60V adjustable（default 19V)
Output current：10A MAX (Please strengthen the cooling of more than 6A)
Constant current range：0.2-10A
Output power= Input voltage x10A.
Working temperature：-40~+85 degree (Please strengthen the heat dissipation when the ambient temperature is too high.)
Working frequency：150KHz
Transfer efficiency：92%-96%
Installation：4*3mm screw hole

How to adjust:
1.Adjust the output voltage:
Adjust CV-ADJ potentiometer, clockwise to decrease, counterclockwise to increase. According to the battery /LED, set the output voltage you desired.
2. Adjust the output current:
Clockwise CC-ADJ potentiometer about 20 laps, the output current set to the minimum value, connect the LED, adjust the CC-ADJ potentiometer to the current you need. For battery charging, after the battery has been discharged, and then connect to the output, adjust CC-ADJ to your required current. (When using for charging, it must be adjusted with the discharge battery, because the battery remains in the more power, the smaller the charging current. ）

NOTE:
1. Please do not use the short-circuit method to adjust the current, because the circuit structure of the booster module cannot be adjusted in the short-circuit way.
2. The input voltage is not less than 10V, too low input voltage will damage the power supply. (When using the battery should pay attention to the battery over-discharge)
When it is working, the input/output voltage and the input/output current cannot exceed the maximum values, so as not to damage the battery.

Package Included:
1pcs DC-DC Boost Converter 600W Power Transformer Module