Backup camera is designed to completely replace the van's third brake light. When installed, this backup camera looks factory-fitted, as though it came with the van originally.
Application:
Ford TourneoⅠ 2014-now
Ford Tourneo Custom Ⅰ 2012-now
Ford TransitⅠ2014-now
Ford Transit Custom Ⅰ 2012-Now
Camera Specification:
Image sensor :1/3 Color CMOS
Resolution :756(H) X 504(V)
TV line :600TV lines
TV System :NTSC
Lens:2.5mm
Min illumination :0Lux (LED ON)
Viewing angle:170°
Operation Temp. :-20℃~+70℃
White Balance :Auto
7inch Clip-on Monitor Specification:
Monitor size :7 inch(800 X 480)
Contrast :16:9
TV System :PAL/NTSC
Video input :AV1/AV2
Power : DC12V-24V
Brightness :400cd/㎡
Installation way: Install the monitor with bracket in car windshield when your car without rearview mirror.
In The Box
1 * Rear mirror monitor
1* Backup Camera
1*10M Extension Cable
1*Power Cable
1 * Manual
1 * Bracket and bracket base
1. How to wire it ?
Backup camera wiring: The camera is 4PIN plug ,please connect it directly to AV input wiring of monitor power cable.
Rear view monitor wiring :Red wire for power source, green wire for reverse, black for ground.
2. Is it ok if I want this rear view camera to always be on ?
Yes, if you want the camera to always be on, you can connect it to a constant 12V/24V power source such as accessory socket (cigarette lighter)that is on all the time, or if you only want it when you reverse you can connect it to the reverse taillights.
3. Install way,
Please remove your original brake light and install the new brake light camera. and stick the bracket base in your car windshield and install the monitor with bracket in the base. Connect all cable with right way. then it is done.