XIM 5J.JEE05.001 Projector Lamp & Projector Bulb with housing.

Lamp compatible projector:
fit for BenQ HT2050A HT2150ST W2000 HT2050 W1110 HT3050 W1210ST W2000+
Please confirm whether the lamp you want to buy is correct before placing an order!

Precautions when using projector lamps:
1.Handle with care.
2.If the ambient temperature is too high, it will automatically turn off the light.
High ambient humidity will reduce the life of the bulb.
3.Do not turn off the projector immediately after turning it on, otherwise it will affect the brightness and lifespan, or even cause the lamp to fail to light up.
4.The projection needs to be cleaned regularly, and the lamp operation and stability should be checked after cleaning is completed.

We can provide:
1. Comparable to the original Bulb/Lamp with Housing.
2. Comparable to the original Bare Bulb.
If necessary, please contact us.

How to change the lamp on your projector:
Step 1. Unplug the power cord from your projector and let the lamp cool down.
Step 2. Locate the lamp access panel on your projector and remove the screws and access panel.
Step 3. Remove any screws holding the lamp housing into the projector.
Step 4. Reach in and firmly pull the lamp housing out of the projector.
Step 5. Place the new lamp housing into the projector in the same orientation as you removed the old lamp.
Step 6. Wiggle the lamp into place and make sure full contact is made inside of the projector.
Step 7. Replace the lamp mounting screws to secure the lamp into the projector.
Step 8. Replace the lamp access panel and secure the screws.
Step 9. Plug in your projector and power it on.
Step 10. Reset the lamp counter. Some lamps will reset the lamp counter automatically when a new lamp is placed in.
If your projector needs the lamp counter manually reset, look through the projector menus for an option to reset the 'Lamp Counter' back to 0 hours.