All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Voltage Support：5V, 9V, 12V, 15V, 20V (Voltage Step is NOT Supported)
Fast Charge Support Protocol: PD2.0/PD3.0, QC2.0/QC3.0, AFC
Voltage Adjustment Method: According to the Table on the Back of the Board, Adjust the DIP Switch to Control the Voltage Output
NOTE: 1.After Adjusting the DIP Switch,Since there is No Voltage Indicator, It is Recommended to Use a Multimeter to Measure the Voltage Before Connecting to the Application Circuit; 2. If the DIP Switch is not Adjusted According to the Table, the Module will Output Any One of the Above Voltage
Package Contents: 10pcs QC AFC PD2.0 PD3.0 to DC Spoof Scam Fast Charge Trigger Polling Detector USB-PD Notebook Power Supply Change Board Module Type-C
4pcs ESP32-CAM WiFi Bluetooth Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module Dual Mode
KWD 10.500
Gravity: IR Positioning Camera for Arduino with I2C Interface | Flame Sensor
KWD 12
KEYESTUDIO GPIO Breakout Kit for Raspberry Pi - Assembled Pi Breakout + Rainbow Ribbon Cable + 400 Tie Points Solderless Breadboard
KWD 4.500
Comimark 5Pcs CAN Bus Module Transceiver TJA1050 Controller Schnittstelle Board for Arduino
KWD 4
